I really envy people who are getting their 2100 printers to work without problems.
I have had this problem and my current work around is to convert to PDF and print from that.
The connector cable is very sensitive. When I swapped the cables around and was not using the one supplied the printer stopped halfway through a print.
I have tried printing on the Epson Panoramic paper and the printing only STARTS halfway through.
My life would be a lot easier if I had never bought the the beast.
Yours
Bob Croxford
On Thursday, March 13, 2003, at 07:26 am, Thomas Holm / Pixl wrote:
I have a client who have OS X 10.2.4 and an Epson 2100. Occasionally she's
able to make a single print or two, (after dumping the printer from the
print centre and adding it again) but generally after a reboot printing is
impossible.
When the printing starts the print centre is processing the print, but then
it says P"rinter is Stopped", and that's it...
I've tried removing the 2100 plug-in from the Library > Printers > Epson
list and reinstalling the 2100 1.4a (from October 2002). After this I can
make a print all right, but after a reboot, it's impossible again...
Anyone?
Best Regards
Thomas Holm / Pixl ApS
=============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
