Very helpful.
Inkjet still looks a little iffy but on screen its near perfect.
all the best
Jonathan
On Wednesday, Oct 22, 2003, at 18:55 Europe/London, Mitch wrote:
The method I use in these scenarios is to add a new layer set to overlay
filled with neutral (50%) grey. Run the noise filter on this layer, and
you're right, the amount depends on the final output size. Basically, add the
absolute minimum required to remove the banding. I sometimes add a layer
mask, fill with black, and paint in the noise where I need it. Sometimes,
it's worth looking at the individual channels in the image to see if the
banding is more prevalent in one of them, you can just add noise to that one,
and that will minimise the overall effect on the image.
=============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
