=> Subject: [NF] Excel custom form question => => Got a colleague who's got a client with an Excel printing problem. => Client has a Oki Microline 591 24-pin printer. Form is a => custom form size (don't have dimensions at hand) but he said => it's "jumping" every print slightly, and eventually gets out => of alignment (vertically) by the 4th or 5th print? I => believe he had set the custom size setting in Excel but => apparently it didn't work as he expected. => => Ideas? => => Thanks! => --Michael =>
I have lots of ideas because I do this all the time but I don't know where to begin. For me it's one of those things that I know so well, I can't explain how to do it. Printer creep should never occur unless you are printing continuously (no form feeds) or the page size is not set right on the printer. Excel will change it's print metrics ever so slightly for different printers and even the same printer if you switch the printer from draft mode to high-quality mode. It will also change things if you alter the font size on the display control panel applet. There are so many variables involved. Ask me some questions ... maybe my answers will help. B+ HALinNY P.S. I promise I will not discuss grammar or spelling. _______________________________________________ Post Messages to: [email protected] Subscription Maintenance: http://leafe.com/mailman/listinfo/profox OT-free version of this list: http://leafe.com/mailman/listinfo/profoxtech ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
