Got JayScript html and ijss scripts to work. Thanks. Added a ten second delay to the ijss script which kept the DOS window open long enough to see that it worked. I had installed J in "Program Files" as I had done with XP but ran into so many problems with J in "Program Files" with Vista that I decided to move J out of "Program Files". I think that might have been causing some of my problems as Vista sometimes hides updates not made as an administrator. When I did that I had to unregister J and JayScipt stuff. For some reason /unregserver and /unregister for J failed under Vista. I don't know if that is a J problem of a problem brought on by Vista. Finally had to go into the registry to clean up.
When I ran test04.html it works after telling Internet Explorer it's ok to run an ActiveX program. But when it starts to run the do__WScript it comes back and warns me again and I have to tell it that it's ok again. It does not issue that warning for the VBScript. I can't find what I need to set for j.dll or the jayscript.dll to prevent that message as with VBScript. Also tried JayScript under Google Chrome. It didn't do anything. No errors. Neither JayScript nor VBScript worked. Where can I learn about the methods available for JayScript? On Sun, Oct 12, 2008 at 11:04 AM, Björn Helgason <[EMAIL PROTECTED]> wrote: > C:\Program Files\j602\addons\general\jayscript\test>test01.wsf > > C:\Program Files\j602\addons\general\jayscript\test>test02.ijss > Microsoft (R) Windows Script Host Version 5.7 > Copyright (C) Microsoft Corporation. All rights reserved. > > CScript Error: Can't find script engine "JayScript" for script "C:\Program > Files > \j602\addons\general\jayscript\test\test02.ijss". > > C:\Program Files\j602\addons\general\jayscript\test>test03.ijss > Microsoft (R) Windows Script Host Version 5.7 > Copyright (C) Microsoft Corporation. All rights reserved. > > CScript Error: Can't find script engine "JayScript" for script "C:\Program > Files > \j602\addons\general\jayscript\test\test03.ijss". > > C:\Program Files\j602\addons\general\jayscript\test>test04.html > > C:\Program Files\j602\addons\general\jayscript\test> > > ------------------------------ > JScript > 1,2,3,4 > ------------------------------ > VBScript > ------------------------------ > JayScript > ------------------------------ > VBScript Again > ------------------------------ > JayScript Again > ------------------------------ > JayScript Event (not working yet) > > > 2008/10/11 Oleg Kobchenko <[EMAIL PROTECTED]> > > > > From: Don Guinn <[EMAIL PROTECTED]> > > > > > > Tried JayScript under Vista Pro and got the following from test02.html: > > > Notice that document.write worked but do__document did not. > > > > This may have to do with whether Active Content is allowed to run. > > You may want to check security options and set it Prompt if Disabled. > > > > > Also, the .ijss > > > scripts just flashed a black window (I assume to be a DOS window) and > > went > > > away. > > > > Try opening the DOS window then cd to the folder and type in the .ijss > > files so that you see the output and window stays. > > > > > The .asp example said it was an unknown file type which was defined > > > but no application was associated with it. > > > > For .ASP you need to have Internet Information Server (IIS) installed > > among Windows Components in Control Panel. Then in IIS console in > > Administrative Tools enable ASP. Then create a virtual folder with > > the .ASP file. Then navigate to the url in Web browser > > http://localhost/path/file.asp > > > > > I see that the source is now available and I am now digging into it to > > see > > > what's going on. While viewing readme.txt, ran into a small problem as > > that > > > the lines are delimited only by LF (0x10), not CRLF. The result is that > > the > > > text is not very readable in Notepad. Looks fine under J. > > > > The J readme.txt has CRLF, but the one in src folder has only LF. > > The src is supposed to be used with Visual Studio. See > > How to: Use Visual C++ Express Edition with the Microsoft Platform SDK > > http://msdn.microsoft.com/en-us/library/ms235626(VS.80).aspx > > > > > Noticed that is a pain to try to modify a .html file as Internet > Explorer > > > caches and always gets the old copy. Is there an easier way to clear > the > > > file than using IE's clear cache tool to get a new copy? > > > > > > ------------------------------ > > > JScript > > > 1,2,3,4 > > > ------------------------------ > > > VBScript > > > 1 2 3 4 > > > ------------------------------ > > > JayScript > > > ------------------------------ > > > VBScript Again > > > 101 102 103 104 > > > ------------------------------ > > > JayScript Again > > > ------------------------------ > > > JayScript Event (not working yet) > > > > > > > > > On Fri, Oct 10, 2008 at 10:37 PM, Oleg Kobchenko wrote: > > > > > > > The suggestion is incorporated. Thank you. > > > > > > > > Integrating setup routines with Package Manager > > > > is also a good idea. One other such discussion was > > > > about facilitating integration with the IDE, such as > > > > shortcuts or menu. BTW, this is in line with already > > > > existing integration: labs. > > > > > > > > > > > > > > > > ----- Original Message ---- > > > > > From: Raul Miller > > > > > > > > > > On Fri, Oct 10, 2008 at 9:28 AM, Oleg Kobchenko wrote: > > > > > > Today JayScript is issued as general/jayscript addon. > > > > > > > > > > > > http://www.jsoftware.com/jwiki/Addons/general/jayscript > > > > > ... > > > > > > > > > > The install instructions ask that I execute jayscript_reg.bat > > > > > > > > > > However, the batch file requires that jayscript.dll be in my > current > > > > directory > > > > > when I run the script, and this was not a part of the instructions. > > > > > > > > > > One way to remedy this would be to change the regsvr32 line in the > > > > > bat file to > > > > > regsvr32 "%~dp0jayscript.dll" > > > > > > > > > > Though, ideally, the package manager should be able to do this. > > > > > > > > ---------------------------------------------------------------------- > > For information about J forums see http://www.jsoftware.com/forums.htm > > > > > > -- > Björn Helgason, Verkfræðingur > Fugl&Fiskur ehf, > Þerneyjarsundi 23, Hraunborgum > Po Box 127,801 Selfoss , > t-póst: [EMAIL PROTECTED] > gsm: +3546985532 > Landslags og skrúðgarðagerð, gröfuþjónusta > http://groups.google.com/group/J-Programming > > > Tæknikunnátta höndlar hið flókna, sköpunargáfa er meistari einfaldleikans > > góður kennari getur stigið á tær án þess að glansinn fari af skónum > /|_ .-----------------------------------. > ,' .\ / | Með léttri lund verður | > ,--' _,' | Dagurinn í dag | > / / | Enn betri en gærdagurinn | > ( -. | `-----------------------------------' > | ) | (\_ _/) > (`-. '--.) (='.'=) > `. )----' (")_(") > > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm >
---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
