I haven't looked in a drill file in a while, but I do not know if one can import it into excel and sort it (by field)?... Or I could write a quickie perl script to do it...
-chris -----Original Message----- From: Georg Beckmann [mailto:[EMAIL PROTECTED]] Sent: Monday, October 01, 2001 12:29 PM To: 'Protel EDA Forum' Subject: [PEDA] AW: NC Drill question I think there is no possibility in protel to do it. In the <pcb-name>.txt file is the information of all the holes position and tool number. The <pcb-name>.drr file containes the tool information. Tool number := diameter := plated or not. In the *.drr file, you see, which is plated and which is not. Since the *.txt file is a text file, you can easily separate the information with cut and paste in two text files. I never had to do it, because the board maker can separate it, if you tell them, that you find the information in the *.drr file. Georg > -----Urspr ngliche Nachricht----- > Von: ElectronTrade (info) [mailto:[EMAIL PROTECTED]] > Gesendet: Montag, 1. Oktober 2001 16:27 > An: Protel EDA Forum > Betreff: [PEDA] NC Drill question > > > Hi all, > > Does somebody know any way to generate different NC Drill files for > plated and non plated holes both in Protel. I can't find > standart feature for > it. > > -- > > Best regards, > Yuri V. Potapoff > Technical Director > ElectronTrade, Ltd. > 8 Ukrainsky boul., Moscow, 121059, Russia > Tel: +7-(095)-243-72-50 > Fax: +7-(095)-243-44-16 > E-mail: [EMAIL PROTECTED] > http://www.electrade.ru > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
