there's a new appcad version out (v2.5) which is not posted yet on the
agilent website but IS posted for download on the appcad website at:
http://www.hp.woodshot.com/
this however does NOT include spiral inductors. If you go down the page and
download the old "classic" version that is the one with spiral inductors and
impedance matching .

Best Regards,
Matt Tudor, MSEE- RF Design & Consulting
Gigahertz Electronics
http://www.gigahertzelectronics.com


-----Original Message-----
From: matt <[EMAIL PROTECTED]>
To: Protel EDA Forum <[EMAIL PROTECTED]>
Date: Monday, October 22, 2001 3:06 PM
Subject: Re: [PEDA] PCB RF Inductors


>Sorry but Appcad 2.0 doesn't calculate spiral inductors or any kind of
>inductors. It does calculate microstrip, stripline, slabline, etc but not
>filters, inductors etc.
>
>Best Regards,
>Matt Tudor, MSEE- RF Design & Consulting
>Gigahertz Electronics
>http://www.gigahertzelectronics.com
>
>-----Original Message-----
>From: Mark Richards <[EMAIL PROTECTED]>
>To: Protel EDA Forum <[EMAIL PROTECTED]>
>Date: Monday, October 22, 2001 2:49 PM
>Subject: Re: [PEDA] PCB RF Inductors
>
>
>Francisco,
>I found the web site for the AppCAD software for calculation of spiral
>inductors:
>
>http://www.semiconductor.agilent.com/cgi-bin/morpheus/home/home.jsp?mktSeg=
W
>ireless&pSection=Wireless&subSection=Wireless
>
>Enjoy!
>
>Mark Richards
>CAD Designer
>ON Semiconductor
>Phone: 602.244.7267
>Fax: 602.244.6716
>Pager: 866.208.9913
>Cell: 480.236.1566
>
>----- Original Message -----
>From: "Francisco Simoes" <[EMAIL PROTECTED]>
>To: "Protel EDA Forum" <[EMAIL PROTECTED]>
>Sent: Friday, October 19, 2001 10:04 PM
>Subject: [PEDA] PCB RF Inductors
>
>
>Hi list.
>Does anyone knows how to design and calculate printed circuit RF inductors?
>Apretiate any info.
>Thank you.
>
>Francisco Sim es
>
>
>


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to