Hello Richards, you can get a detailed list to control all netlengths. To create this list press "Reports / Netlist Status" in the PCB editor.
Best regards, Florian Finsterbusch > -----Original Message----- > From: Mark Richards [mailto:[EMAIL PROTECTED]] > Sent: Thursday, November 08, 2001 12:11 AM > To: Protel EDA Forum > Subject: [PEDA] Routed trace length > > > Hello, > When manually routing traces (Protel 99SE), I often need to do some > length matching. I have searched all the menu's and the help files, but > I have been unable to find anything that will tell me the physical > length of a routed net. Am I missing something (besides most of my brain > cells)? Is there anything within the PCB editor that provides this > information? I have tried several times to just use the "Equalize Net > Lengths" feature with very disappointing results. Any suggestions would > be greatly appreciated. > > Regards, > > -- > Mark Richards > ON Semiconductor > 5005 E. McDowell Road > Phoenix, Arizona 85008 > Phone: 602.244.7267 > Pager: 866-208-9913 > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *