Thanks Tim! The Netlist Manager worked great and did not change a violation short where I connect Ground 1 to Ground 2. Now that I did this I know I have been given this advise before and could not remember it to save my life! I never use the Netlist Manager.
Jeff -----Original Message----- From: Tim Fifield [mailto:[EMAIL PROTECTED]] Sent: Monday, November 26, 2001 2:18 PM To: Protel EDA Forum Subject: Re: [PEDA] Footprint 215 Jeff, Try: Design/Netlist Manager/Menu/Update Free Primitives From Component Pads. Tim -----Original Message----- From: Jeff Adolphs [mailto:[EMAIL PROTECTED]] Sent: Monday, November 26, 2001 2:52 PM To: Protel EDA Forum (E-mail) Subject: [PEDA] Footprint 215 Hi! I used a Protel Footprint SOT-89 (I call it 215 from IPC-SM-782) which gives me DRC errors. The problem is pin 2 has a rectangular pad with a bunch of fills and tracks added to make a big tab. The fills and tracks do not pick up the net name when the netlist is loaded giving many DRC errors. How can I get the tab to be part of the net? Clicking on the individual tracks and fills works but is a pain and the net information goes away at some point, possibly on load netlist. I have lived with the DRC errors but it is annoying. Jeff Adolphs Lake Shore Cryotronics, Inc. Westerville, Ohio * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
