Never mind with the repair, some one else had the ddb file open even though
it didn't on my active design stations in the design explorer.

Tim

-----Original Message-----
From: Brad Velander [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 30, 2001 3:09 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Please HELP!


Tim,
        my first guess is that something has corrupted your "ADVPCB.DLL"
file. Others would probably know better if I am wrong. First thing that I
would do is to save and protect any files that you have customized (ie. INI
files, libraries, etc.).

        If this error is only occuring in one database (try others to see if
they are acting similarly), then you can try the database repair facility
which is found under the Downward Arrow on the menu bar, under the Design
Utilities, Repair tab. You must have the database closed to perform the
database repair.

        Then Protel has a repair facility built into their install CD. This
will repair/replace damaged install files. After applying the repair
facility you should probably also apply the latest service pack which you
had previously installed. Should be SP6.

        Short of that, I can't think of anything else. Other may have better
comments.

Sincerely,
Brad Velander.

Lead PCB Designer
Norsat International Inc.
#300 - 4401 Still Creek Drive,
Burnaby, B.C., Canada, V5C 6G9.
Tel   (604) 292-9089 (direct line)
Fax  (604) 292-9010
Website: www.norsat.com


-----Original Message-----
From: Tim Fifield [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 30, 2001 10:44 AM
To: Protel EDA Form
Subject: [PEDA] Please HELP!


Every time I do something in 99SE PCB editor I get a little window that says

 "Access violation at address 0E347E2A in module 'ADVPCB.DLL' Read ...

Exception Information:

Exception Occurred in
PCB: (What ever the last command was)

Note: After any system crash it is good practice to save your work and
restart windows.

Ignore

Quit


What is going on!? I've restarted 3 times now and the first thing I do gives
me that message.

I'm using 99SE SP6 with windows 2000 sp2.

Please help me!

Tim Fifield

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to