another idea if you have a copy is to try autosketch
it's pretty cheap
also maybe camtastic
as i mentioned R14 got real uppity about itself

Dennis Saputelli

Bagotronix Tech Support wrote:
> 
> John:
> 
> I have Autocad LT95 and used to use Protel v2.8.  LT95 had DXF import
> problems.  It wouldn't accept a DXF file from Protel, claiming some kind of
> error in the file.  The workaround was to create a new blank drawing, draw a
> line, delete the line, THEN import the DXF.  That worked fine.  It shouldn't
> have, but it did.
> 
> Maybe this workaround will work for you.
> 
> Best regards,
> Ivan Baggett
> Bagotronix Inc.
> website:  www.bagotronix.com
> 
-- 
___________________________________________________________________________
www.integratedcontrolsinc.com            Integrated Controls, Inc.    
   tel: 415-647-0480                        2851 21st Street          
      fax: 415-647-3003                        San Francisco, CA 94110

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to