When Protel assigns gerber file name extensions (xxxxxx.gxx), what is the
rule for internal layers? I just did a 6 layer board, and the extensions
are. g10, .g1, .g2 & .g5.
When you try to import either a single or batch file, Protel only allows a 3
character extension to be seen, and not a 2 character extension. Here are
the layer names and their filename extensions:
.G10 = -5V PLANE COPPER
.G5  = GROUND PLANE COPPER
.G1  = +3.3/+/-12V PLANE
.G2  = +5V PLANE





Sean James
PCB Designer
Telecast Fiber Systems, Inc.
102 Grove Street
Worcester, MA 01605
(TEL) 508.754.4858 x33
(FAX) 413.541.6170


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to