This has been a little screwy for a long time. UNTIL they fix it, you'll have to rename the 2 digit files such as:
.g1 --> .g01 That allows the gerber read back to get them all. > -----Original Message----- > From: Sean James [mailto:[EMAIL PROTECTED]] > Sent: Friday, December 21, 2001 10:00 AM > To: Protel EDA Forum > Subject: [PEDA] Gerber file naming convention > > > When Protel assigns gerber file name extensions (xxxxxx.gxx), what is the > rule for internal layers? I just did a 6 layer board, and the extensions > are. g10, .g1, .g2 & .g5. > When you try to import either a single or batch file, Protel only > allows a 3 > character extension to be seen, and not a 2 character extension. Here are > the layer names and their filename extensions: > .G10 = -5V PLANE COPPER > .G5 = GROUND PLANE COPPER > .G1 = +3.3/+/-12V PLANE > .G2 = +5V PLANE > > > > > > Sean James > PCB Designer > Telecast Fiber Systems, Inc. > 102 Grove Street > Worcester, MA 01605 > (TEL) 508.754.4858 x33 > (FAX) 413.541.6170 > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
