> I have just discovered a bug.  When using the print-preview tool to print a PCB 
>containing 'Arc-mode' tracking, it locks up the application and I have to re-start 
>Protel.  Otherwise, I have found the print preview tool to be almost excellent.
> 2 questions:
> Is this old news, or have I found something new?
> Is there any way of printing a PCB with 'Arc-mode' tracking?

David

I have just tried printing arc's and they seem OK. I also tried it on Zarlink SNIM 
layout (Mike B's) by changing some of his 45 deg routes to arc and trying again and it 
still seems OK.

I had a lot of issues with Print/Preview feature before SP6 as large format printers 
(HP350/750C+) were not supported properly before then. But with SP6 all seems OK.

Best Regards

John A. Ross

RSD Communications Ltd
8 BorrowMeadow Road
Springkerse Industrial Estate
Stirling, Scotland FK7 7UW

Tel     +44 [0]1786 450572 Ext 225 (Office)
Tel     +44 [0]1786 450572 Ext 248 (Lab)
Fax     +44 [0]1786 474653
GSM     +44 [0]7831 373727

Email   [EMAIL PROTECTED]
WWW     http://www.rsd-communications.co.uk



 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to