A couple of things that come to mind could cause a track not to import properly into Protel.
First - select one of the troublesome tracks in Camtastic, and verify the aperture. If the aperture is too small - or undefined - the track won't be visible in Protel. Second - you can check the entry in the Gerber file for one of the missing tracks. Get one of the end points from Camtastic, then do a search for that point in the Gerber file with a text editor. You can then verify that the draw is defined the way Protel expects it to be (as discussed in Knowledge Base Article 2215). The sad story is that sometimes you just can't easily get there from here. Protel has openly stated that the Gerber import is not intended to import anything except the Gerber files generated by Protel. At 01:00 AM 6/16/02 -0700, you wrote: >That didn't help much. I was already on the right track. The problem I'm >having is that several tracks are missing from the gerber read into Protel. >I see them just fine in Camtastic, but they are "missing" when read into >P99SE snip ************************************************************************ * Tracking #: D3332460E02C184DB24B0BB8DADD016CD28ECF53 * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
