I know it's ugly right now.  As long as your mouse no longer gets stuck during 
auto-panning.  In my next version, the windows
will be auto placed, and invisible.  I just want to make sure that this solution works 
on more PCs other than my system.

____________
Brian Guralnick

----- Original Message -----
From: "Thomas" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent: Monday, June 24, 2002 2:25 AM
Subject: Re: [PEDA] Autopan patch.


> Finally managed to get ftp working through our firewall.
>
> The two windows do weird things to floating toolbars if the
> toolbar is dragged under them.
>
> You're right: Ugly! I think I'll stick with re-centre.
>
> Cheers for trying anyway,
>
> Tom.
>
> > -----Original Message-----
> > From: Brian Guralnick [mailto:[EMAIL PROTECTED]]
> > Sent: Saturday, 22 June 2002 6:30 AM
> > To: Protel EDA Forum
> > Subject: [PEDA] Autopan patch.
> >
> >
> > My auto-pan patch is here.  Ok, so it's ugly, but if you are
> > stuck with an ATI or Matrox video card, it really works.
> >
> > Copy this link into your IE web browser & download
> > "ProtelAutopanPatch.zip"
> > ftp://ftp.point-lab.com/quartus/Public/ProtelUsers/
> >
> > Look at the .png example picture,
> >
> > Run both of my programs,
> >
> > Place the 2 windows over the PCB editor windows so that it
> > matches the locations of the .png example photo.
> >
> > If you covers the fundamental top left of your PCB display &
> > the center right of the PCB display, your auto pan will now work the
> > way it was intended to.
> >
> > ____________
> > Brian Guralnick
> >
> >
> >
> > **************************************************************
> > **********
> > * Tracking #: 07C04E1ACB72FF44B88A5E1600AFF8EB0CDF3A9C
> > *
> > **************************************************************
> > **********
> >


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to