no, it's protel schematic not handling a nonexistant printer gracefully
Dennis Saputelli
Joe Sapienza wrote:
>
> Dennis,
> Sounds like it has something to do with the UPS printer driver setup,
> possibly a port conflict.
> Joe
>
> ----- Original Message -----
> From: "Dennis Saputelli" <[EMAIL PROTECTED]>
> To: "Protel EDA Forum" <[EMAIL PROTECTED]>
> Sent: Tuesday, July 09, 2002 1:51 PM
> Subject: Re: [PEDA] the printer bug once again
>
> > i have been whining about the 'printer bug' for a while
> >
> > i got nowhere w/ protel support
> > they 'never heard of it' and could not reproduce it
> >
> > well i have just reproduced again, and here is the story
> >
> > the printer for one of our machines is a network printer attached to the
> > UPS shipping computer
> >
> > that machine with the printer gets the hand me downs and melts down from
> > time to time
> > it just melted down again and was replaced
> > it was the default printer for the protel machine via the network
> >
> > after the printer computer was replaced i started a protel session on
> > the protel machine and it crashed big time
> > (several times)
> > i rebooted the protel machine, set the default printer to Distiller
> > instead of the old and now nonexistent default printer from the melted
> > down machine
> > and now all is well again
> >
> > Dennis Saputelli
> >
> >
> > ************************************************************************
> > * Tracking #: 3596749109DB6B4F931852CDE0476B219AFAD512
> > *
> > ************************************************************************
> > --
> >
> ___________________________________________________________________________
> > www.integratedcontrolsinc.com Integrated Controls, Inc.
> > tel: 415-647-0480 2851 21st Street
> > fax: 415-647-3003 San Francisco, CA 94110
--
___________________________________________________________________________
www.integratedcontrolsinc.com Integrated Controls, Inc.
tel: 415-647-0480 2851 21st Street
fax: 415-647-3003 San Francisco, CA 94110
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
