Thanks Phil. > -----Original Message----- > From: DUTTON Phil [mailto:[EMAIL PROTECTED]] > Sent: Friday, 26 July 2002 2:36 PM > To: Protel EDA Forum > Subject: Re: [PEDA] TQFP footprint > > > http://dc.ipc.org/resources/tools.htm > > This should help you. > > regards, > > Phil Dutton C.I.D. > > -----Original Message----- > From: Thomas [mailto:[EMAIL PROTECTED]] > Sent: Friday, 26 July 2002 12:43 > To: Protel Data Forum (E-mail) > Subject: [PEDA] TQFP footprint > > > Does anyone know a good source (preferably on line) where I can find > information on laying out a 64 pin TQFP (thin quad flat pack) > footprint? Is > there one already available? > > The device I'm using is a Microchip part and they only have > dimensioned > package drawings (no footprint info). I'm still looking for other > manufacturers that use the same package and have footprint > info available. > > This is my first go at making an smd footprint and I don't > want to stuff it > up. > > Thanks, > > Tom. > > ************************************************************** > ********** > * Tracking #: 175EB81F9A79A643B3BEBD2C84D4E65841FDF78C > * > ************************************************************** > ********** >
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
