FYI

This is from the introduction at the link below, "FastFieldSolvers (...was
conceived...) in early 2000, from past experience gathered using two
excellent tools for electromagnetic parasitic extraction of 3D geometries
coded at M.I.T. and released in the public domain, (...namely...) FastHenry
and FastCap."

http://www.fastfieldsolvers.com/

You can browse this link to assess suitability for you, and download it for
free if you're interested. This is academic material with no commercial CAE
interface (that I can find), so you'll have to enter your geometry manually.
Let us know if you have any success with this.

Regards,
Fred A Rupinski

----- Original Message -----
From: "Danny Bishop" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent: Wednesday, August 07, 2002 9:05 PM
Subject: [PEDA] automatic calculation of PCB resistances and inductances


> hi everyone
>
> is there anyway to get Protel to calculate the PCB resistance and
inductance
> between specific points? The calculation is either quite painful or rather
> inaccurate by measuring the thickness.
>
> cheers




************************************************************************
* Tracking #: 43F91AA2A32BB740B9A8A3B7D076C947C574A05A
*
************************************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to