Hi all, I checked the Yahoo bug list, but scanning it I couldn't find these particular bugs listed.
PCB P99SE SP6 Library Part Placement Manually placing land pattern in PCB. After clicking "Place" in the library browse window, move the component across your design. While moving the part press spacebar to rotate the part (works real well with 5 degree rotation increments). If you are moving the part while rotating, the part will become dislodged from your cursor making placement a completely guesswork process. Depending on how fast you move the part while rotating the cursor attachment of the part can become quite widely separated. PCB P99SE SP6 PCB Printer. In printing a PCB there is a case where pads will not print correctly even if their layer (both multilayer and top layer) is called for printing. Using multilayer pads and the padstack set with only a topside pad, no midlayer pad and no bottom pad means that this pad will never show in a print. There is only a blank hole where the pad should print. The mechanism that seems the manifest this error is setting the midlayer pad to "0" size. Setting the midlayer pad to any size other than "0" will cause the pads to print. Setting the bottom pad size to any value has no effect on this bug. The pad that is printed for the multilayer or topside pad matches the sizing of the midlayer pad in the padstack. It does not match the top layer pad sizing. This occurs even when there are no midlayers included in the print. Sincerely, Brad Velander. Lead PCB Designer Norsat International Inc. Microwave Products Tel (604) 292-9089 (direct line) Fax (604) 292-9010 email: [EMAIL PROTECTED] http://www.norsat.com Norsat's Microwave Products Division has now achieved ISO 9001:2000 certification ************************************************************************ * Tracking #: FBE4F9263514434DA5F62418D1D3961F8B22A24A * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *