Hi, all;

A client is having trouble locating a reasonably priced assembly
house for a precision analog PCI card having fairly high density
and requiring scrupulous attention to processing cleanliness.
Board has a few 19mil lead pitch chips along with 26mil and
larger chips, and about 30% throughhole hand-adds. They
aren't "trick" boards; we've hand-assemble many samples in 8-10 
hours with a 95%+ turn-on rate.

Run sizes are moderate, and they'd prefer to stay in Washington,
Oregon or California. BC is a possibility, but I expect crossing
the border might be an on-going annoyance/expense.

Any tips would be appreciated.

Brian
[EMAIL PROTECTED]



************************************************************************
* Tracking #: 40A8C3A74B1DD544B837320468EB2ACF1050C34E
*
************************************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to