Check to see that the Color Mode is set to color, not monochrome.

Steve Smith

> -----Original Message-----
> From: Brad Velander [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 19, 2002 12:03 PM
> To: Protel EDA Forum List Server (E-mail)
> Subject: [PEDA] P99SE SP6 SCH print annoyance.
> 
> 
> Hi all,
>       we have a print problem with schematics that seems to be
> intermittent or at least it is migrating around machines. A 
> couple of months
> ago we noticed that some peoples SCH prints would print caps, 
> zeners, etc.,
> with unfilled rectangles (the cap plates and zener bars are 
> drawn in the
> library as filled rectangles). At that time my machine config 
> printed these
> items filled, religiously. Now my machine, in the last 2-3 weeks, has
> started printing these items as unfilled rectangles as well. 
> We all print to
> the same printer via the same print drivers, the printer has not been
> changed, as far as I know no print drivers have been changed. 
> Any ideas?
> 
> Sincerely,
> Brad Velander.
> 
> Lead PCB Designer
> Norsat International Inc.
> Microwave Products
> Tel   (604) 292-9089 (direct line)
> Fax  (604) 292-9010
> email: [EMAIL PROTECTED]
> http://www.norsat.com
> Norsat's Microwave Products Division has now achieved ISO 9001:2000
> certification 
> 
> 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to