Thanks, I wish I had gotten one of those.
But most of these shortcuts are available from the help menu.
Here are most of them:

PCB Shortcuts:

Use the following shortcuts to speed the routing process;

BACKSPACE       removes the previously placed track segment while routing a connection.
*       toggles through the routing layers while routing. 
/       places a via connecting to a power plane.
TAB     pop up the Track properties dialog box to edit track attributes while routing.
SHIFT+R cycles through the interactive routing modes.
SHIFT+S toggles single-layer display mode on and off.
SPACEBAR        changes between track placement start and end angle modes.
SHIFT+SPACEBAR  cycles through the track placement modes.
CTRL+SPACEBAR   cycles through the connection lines connecting to a pad.
CRTL    temporarily suspends the electrical grid.
ALT     temporarily switches from Avoid Obstacle to Ignore Obstacle mode.
End     refreshes the display while routing.


Menu Shortcuts include: 

Key     Opens ...
A       Tools » Align submenu
B       View » Toolbars submenu
D       Design menu
E       Edit menu
F       File menu
G       Snap Grid popup menu
H       Help menu 
J       Edit » Jump submenu
M       Edit » Move submenu
O       Options popup menu
P       Place menu
R       Reports menu
S       Edit » Select submenu
T       Tools menu
U       Tools » Unroute submenu
V       View menu
W       Window menu
X       Edit » DeSelect menu
Z       Zoom popup menu


Special Mode-Dependent Keys include:

TAB     Opens a dialog box for the object currently being placed. Allows you to edit 
attributes when placing any object. Use the tab key to "edit on the fly".
SPACEBAR        Toggles between Start and End track placement modes; rotate item 
anti-clockwise during move (set step value in Preferences dialog box); abort screen 
redraw; change the MiniViewer magnification level.
SHIFT   Control acceleration during Autopan (set mode in Preferences dialog). 
SHIFT+SPACEBAR  Toggle track placement modes; rotate item clockwise during move.

' ©Protel International 1999. All rights reserved.

Schematic Shortcuts:

The following is a list of the default schematic menu shortcut keys:

Key     Opens the ...
A       Edit » Align sub-menu
B       View » Toolbars sub-menu
E       Edit menu
F       File menu
H       Help menu 
J       Edit » Jump sub-menu
L       Edit » Set Location Marks sub-menu
M       Edit » Move sub-menu
O       Options menu
P       Place menu
R       Reports menu
S       Edit » Select sub-menu
T       Tools menu
V       View menu
W       Window menu
X       Edit » DeSelect menu
Z       Zoom pop-up menu


SPACEBAR        to abort screen re-draws
X, A    to de-select all
V, D    to zoom to fit the sheet
V, F    to zoom to fit all placed objects
PgUp    to zoom in (zooms in around the cursor, so position the cursor first)
PgDn    to zoom out
HOME    to re-center the screen at the current cursor position
END     to refresh the screen
TAB     while an object is floating on the cursor to edit its attributes prior to 
placement.
SPACEBAR        whilst placing an object to rotate it by 90 degrees
X       whilst placing an object to flip it along the X axis
Y       whilst placing an object to flip it along the Y axis
DELETE  whilst laying a wire/bus/line/polygon to delete the last vertex
BACKSPACE       whilst laying a wire/bus/line/polygon to delete the last vertex
SPACEBAR         while laying a wire/bus/line to step through the placement modes
ESC      to escape from what you are doing when you change your mind
CTRL+TAB         to switch between open documents in EDA/Client
ALT+TAB  to switch between open applications in Windows
F1      when you have a cross-hair cursor to pop up a list of shortcut keys


The following is a list of the default schematic shortcut keys:

CTRL+BACKSPACE  Redo
ALT+BACKSPACE   Undo
PgUp    Zoom In
CTRL+PgDn       Zoom All
PgDn    Zoom Out
END     Redraw
CTRL+HOME       Jump to Origin
HOME    Pan
SHIFT+Left Arrow        Cursor Left (10x snap grid)
Left Arrow      Cursor Left (on snap grid)
SHIFT+Up Arrow  Cursor Up (10x snap grid)
Up Arrow        Cursor Up (on snap grid)
SHIFT+Right Arrow       Cursor Right (10x snap grid)
Right Arrow     Cursor Right (on snap grid)
SHIFT+Down Arrow        Cursor Down (10x snap grid)
Down Arrow      Cursor Down (on snap grid)
SHIFT+Insert    Paste
CTRL+Insert     Copy
SHIFT+Delete    Cut
CTRL+Delete     Clear
DELETE  Delete focused object
CTRL+1  Zoom 100
CTRL+2  Zoom200
CTRL+4  Zoom400
CTRL+5  Zoom050
CTRL+F  Find Text
CTRL+G  Find And Replace Text
CTRL+V  Align objects horizontally, through their centers
CTRL+B  Align objects horizontally, along their bottom edge
CTRL+T  Align objects horizontally, along their top edge
CTRL+SHIFT+H    Space objects equally horizontally
CTRL+H  Align objects vertically, through their centers
CTRL+L  Align objects vertically, along their left edge
CTRL+R  Align objects vertically, along their right edge
CTRL+SHIFT+V    Space objects equally vertically
F1      Run Online Help
F3      Find next text
SHIFT+F4        Tile all open documents
SHIFT+F5        Cascade all open documents
SHIFT+CTRL+Left_Click   Move single object
SHIFT+Left_Click        Toggle single object selection
CTRL+Left_Click, then release CTRL      Drag single object
CTRL+Left_Hold_Down, then release CTRL  Drag single object
Hold CTRL while moving or dragging      Disable snap grid
Hold ALT while moving or dragging       Constrain movement  to vertical direction
Hold SHIFT+ALT while moving or dragging Constrain movement  to horizontal direction
Left_Click      Focus object
Left_Dbl_Click  Change object
Left_Hold_Down  Move object / move selection

' ©Protel International 1999. All rights reserved

Regards,
Steve Smith, C.I.D.
Product Engineer
Staco Energy Products Co.
Web Site: www.stacoenergy.com
& www.stacopower.com


-----Original Message-----
From: Terry Creer [mailto:[EMAIL PROTECTED] 
Sent: Friday, October 10, 2003 12:31 AM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] CTL key during routing & placement & electrical grid.


Ok, I've scanned and uploaded it to:

http://groups.yahoo.com/group/protel-users/files/

(Mousepad.jpg)

If you're not registered, or don't want to register, email me and I'll send it to 
you...

Best regards,

Terry
([EMAIL PROTECTED])


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to