not that i can see, EXCEPT if you save as ascii PCB
here is a snip from a simple bd at bottom

can you explain more what they are trying to do?
recreate in another system?

i assume you are aware that you *can* export the design rules to a file

Dennis Saputelli


|RECORD=Class|NAME=MTGHOLES|KIND=9|SUPERCLASS=FALSE|M0=MT7|M1=MT6|M2=MT5|M3=MT4|M4=MT3|M5=MT2|M6=MT1|M7=MT8|M8=MT1|SELECTED=FALSE
|RECORD=Class|NAME=SMALLCONSM|KIND=9|SUPERCLASS=FALSE|M0=J20|M1=J2|M2=J1|M3=J4|M4=J3|M5=J6|M6=J5|M7=J8|M8=J7|M9=J100|SELECTED=FALSE
|RECORD=Class|NAME=8MILOK|KIND=8|SUPERCLASS=FALSE|M0=LLE1|M1=LLE4|M2=LSC1|M3=LSC4|M4=LSD1|M5=LSD4|M6=SWS1|M7=SWS4|SELECTED=FALSE
|RECORD=Class|NAME=+-5|KIND=8|SUPERCLASS=FALSE|M0=NetJ32_1|M1=+5V1|M2=+5VM|SELECTED=FALSE
|RECORD=Class|NAME=POWER|KIND=8|SUPERCLASS=FALSE|M0=+PWR4|M1=+PWR1|M2=+12Q6|M3=+12Q5|M4=NetJ32_3|M5=-5VM1|M6=NetJ32_1|M7=+5V1|M8=FAN|SELECTED=FALSE
|RECORD=Class|NAME=All
Components|KIND=9|SUPERCLASS=TRUE|M0=VR3|M1=KEY4|M2=LD13|M3=C4|M4=C3|M5=C2|M6=C1|M7=R21|M8=E4|M9=E3|M10=E2|M11=E1|M12=Q1|M13=D1|M14=R14|M15=R13|M16=KEY1|M17=R9|M18=RF1_1|M19=R5|M20=LD9|M21=SW1|M22=VR1|M23=LD2|M24=LD2|M25=J5|M26=J1|M27=KEY2|M28=MB10|M29=ST4|M30=VR2|M31=LD4|M32=LD4|M33=J6|M34=KEY3|M35=LD11|M36=SW3|M37=LD6|M38=LD6|M39=J7|M40=LD12|M41=SW4|M42=VR4|M43=LD8|M44=LD8|M45=J8|M46=Q2|M47=D2|M48=R16|M49=R15|M50=R10|M51=RF2_1|M52=R6|M53=Q3|M54=D3|M55=R18|M56=R17|M57=R11|M58=RF3_2|M59=R7|M60=Q4|M61=D4|M62=R20|M63=R19|M64=R12|M65=RF4_2|M66=R8|M67=J2|M68=J3|M69=J4|M70=J3|M71=J4|M72=J6|M73=J5|M74=MB10|M75=VR3|M76=KEY4|M77=LD13|M78=C4|M79=C3|M80=C2|M81=C1|M82=E4|M83=E3|M84=E2|M85=E1|M86=Q1|M87=D1|M88=R14|M89=R13|M90=KEY1|M91=R9|M92=RF1_1|M93=R5|M94=LD9|M95=SW1|M96=VR1|M97=LD2|M98=LD2|M99=J5|M100=J1|M101=KEY2|M102=ST4|M103=VR2|M104=LD4|M105=LD4|M106=J6|M107=KEY3|M108=LD11|M109=SW3|M110=LD6|M111=LD6|M112=J7|M113=LD12|M114=SW4|M115=VR4|M116=LD8|M117=LD8|M118=J8|M119=Q2|M120=D2|M1!
 21=R16|M122=R15|M123=R10|M124=R6|
M125=Q3|M126=D3|M127=R18|M128=R17|M129=R11|M130=RF3_2|M131=R7|M132=Q4|M133=D4|M134=R20|M135=R19|M136=R12|M137=RF4_2|M138=R8|M139=J2|M140=J3|M141=J4|M142=RF2_1|M143=MB10|M144=VR3|M145=KEY4|M146=LD13|M147=C4|M148=C3|M149=C2|M150=C1|M151=E4|M152=E3|M153=E2|M154=E1|M155=Q1|M156=D1|M157=R14|M158=R13|M159=KEY1|M160=R9|M161=RF1_1|M162=R5|M163=LD9|M164=SW1|M165=VR1|M166=LD2|M167=LD2|M168=J5|M169=J1|M170=KEY2|M171=ST4|M172=VR2|M173=LD4|M174=LD4|M175=J6|M176=KEY3|M177=LD11|M178=SW3|M179=LD6|M180=LD6|M181=J7|M182=LD12|M183=SW4|M184=VR4|M185=LD8|M186=LD8|M187=J8|M188=Q2|M189=D2|M190=R16|M191=R15|M192=R10|M193=R6|M194=Q3|M195=D3|M196=R18|M197=R17|M198=R11|M199=RF3_2|M200=R7|M201=Q4|M202=D4|M203=R20|M204=R19|M205=R12|M206=RF4_2|M207=R8|M208=J2|M209=J3|M210=J4|M211=RF2_1|SELECTED=FALSE
|RECORD=Class|NAME=All Nets|KIND=8|SUPERCLASS=TRUE|SELECTED=FALSE
|RECORD=Class|NAME=All From-Tos|KIND=15|SUPERCLASS=TRUE|SELECTED=FALSE
|RECORD=Class|NAME=All Pads|KIND=2|SUPERCLASS=TRUE|SELECTED=FALSE
|RECORD=Class|NAME=BREAKAWAYS|KIND=9|SUPERCLASS=FALSE|M0=MB11|M1=MB8|M2=MB7|M3=MB6|M4=MB18|M5=MB17|M6=MB16|M7=MB15|M8=MB9|M9=MB1|M10=MB2|M11=MB3|M12=MB4|M13=MB5|M14=MB10|M15=MB12|M16=MB23|M17=MB22|M18=MB21|M19=MB21|M20=MB20|M21=MB19|M22=MB19|M23=MB14|M24=MB13|SELECTED=FALSE




John Haddy wrote:
> 
> Hi all,
> 
> We're trying to export all the information from a 99SE
> database so that we can provide it to a contractor who
> doesn't have any access to Protel (or a Protel import
> tool).
> 
> Our big sticking point at the moment is in getting the
> list of classes and class mambers out of the ddb and
> into a text file.
> 
> Has anybody done this?
> 
> Thanks,
> 
> John Haddy
> 

-- 
Dennis Saputelli

  ========= send only plain text please! - no HTML ==========
_______________________________________________________________________
Integrated Controls, Inc.           www.integratedcontrolsinc.com  
2851 21st Street                    tel: 415-647-0480
San Francisco, CA 94110             fax: 415-647-3003


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to