I have an idea on reference schematics. Print them out as PDF files with Adobe Acrobat. Then you can pull up the PDF file and not have to bring up Protel 3.2. All my schematics are in the PDF format on a network drive so all the co-workers who don't have Protel can reference the schematics. We are also putting Digital Signatures on page 1 of the set of schematics so they know they have the approved final version.
If you need to reference the PCB that would be a different story. Jeff -----Original Message----- From: Robert Ritchey [mailto:[EMAIL PROTECTED] Sent: Friday, January 09, 2004 9:56 AM To: [EMAIL PROTECTED] Subject: [PEDA] Re2: Client 3.2 Under Win2K? Hi Jeff, I tried this on Win2K Professional with no luck. I had been running under WinNT with no problems for a long time. Luckily I still have NT on the machine and can dual-boot but its time consuming. Sometimes I just need to reference a schematic rather than do work. Thanks, At 12:00 AM 1/9/2004 -0800, DOLIST Server Expert 3.4 B2157 wrote: >From: "Jeff Adolphs" <[EMAIL PROTECTED]> >To: "Protel EDA Forum" <[EMAIL PROTECTED]> >Date: Thu, 8 Jan 2004 17:10:16 -0500 >Subject: RE: [PEDA] Client 3.2 Under Win2K? > >I had was running Client 3.2 before I upgraded to Protel 99SE with Win NT. >The only thing I remember is to right click on the Icon for Protel and >click run under a separate memory space. As long as I had run under a >separate memory space checked Protel ran without problems. I am not saying >it never crashed but mostly ran well. >Jeff Adolphs >Westerville, Ohio > >-----Original Message----- >From: Robert Ritchey [mailto:[EMAIL PROTECTED] >Sent: Thursday, January 08, 2004 9:31 AM >To: Protel EDA Forum >Subject: [PEDA] Client 3.2 Under Win2K? > >I know this is ancient history to most but I do need this occasionally. >Does anyone know a trick to make Client 3.2 run on Win2K reliably. It fails >2 out of 3 times to initialize. I cannot kill it, it takes down WOW and Ihave >to re-boot. A logout and log back in does not work. I have the servicepack >installed. Anything in the INIT file? >Thanks, > >-Bob -Bob -------------------------------------------------------------------- Robert Ritchey Quest Engineering & Development 1328 East Cottonwood Lane Phoenix, AZ 85048-4765 Tel: (480) 460-2652 FAX: (480) 460-2653 E-Mail: [EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] WWW: www.QuestEngDev.com/ WWW: www.Smart-Fly.com/ -------------------------------------------------------------------- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *