must be nice. lol. GF
On Jul 20, 2010, at 8:50 PM, Chuck Reichel wrote: > Hi list, > I just wanted to mention while were on the topic of Hardware "A/D for PT. > that I just installed a "Lynx Aurora 16 > > " along with a hd3 system and so far very cool. > 16 analogue I/O and 16 Aes-ebu "digital"I/o and it worked with PT out of its > box! LOL > Just wanted to say there is a alternative to the digi 192 out there for about > $3K! > here is a link to check it out > http://www.lynxstudio.com/product_detail.asp?i=1 > Talk soon > > > Chuck Reichel > 954-742-0019 > www.SoundPictureRecording.com > > > On Jul 20, 2010, at 4:54 PM, Michael Huckabay wrote: > >> Cool Thansk for the info hay you sed something about you use a 24 chanil >> interface you wouldn't know wich one this whas by? >> On 2010-07-18, at 10:18 AM, Slau Halatyn wrote: >> >>> I don't use a Mac Book Pro in the studio. That's just my laptop. That said, >>> it has an Express 34 slot so I can hook it up to a Magma expansion chassis >>> which houses the HD PCI cards if I need a portable solution for remote >>> sessions. I'm preparing to buy a Mac Pro. Currently, the HD system is >>> running off a dual processor G4. >>> >>> Slau >>> >>> On Jul 17, 2010, at 10:40 PM, Michael Huckabay wrote: >>> >>>> Hi Slau I have a ? for you you use a macbook pro in your studio is that >>>> right? Will if it is I was kerius what hardware you used to make pro >>>> tools Hd work. >>>> On 2010-07-17, at 4:40 PM, Slau Halatyn wrote: >>>> >>>>> Ah, right. Well, I'm sure that Bryan will get the file from Patrick soon >>>>> and will post it as soon as he has an opportunity. >>>>> >>>>> Slau >>>>> >>>>> On Jul 17, 2010, at 5:28 PM, Michael Huckabay wrote: >>>>> >>>>>> Thanks verry much and I understand what you mean about that. I'm just >>>>>> kerius how things work with vo so that is why I was intersted in the >>>>>> demo. >>>>>> On 2010-07-17, at 3:16 PM, Slau Halatyn wrote: >>>>>> >>>>>>> I'm not sure when that might be posted but, keep in mind, it's not a >>>>>>> tutorial but more of an overview of what kind of accessibility there is >>>>>>> in the new version. >>>>>>> >>>>>>> Slau >>>>>>> >>>>>>> On Jul 17, 2010, at 2:35 PM, Michael Huckabay wrote: >>>>>>> >>>>>>>> Hay ? for you you wouldn't know when the pro tools demo from acb file >>>>>>>> that was recorded will be posted do you? >>>>>>>> On 2010-07-17, at 1:17 PM, Slau Halatyn wrote: >>>>>>>> >>>>>>>>> Hey Clarence, >>>>>>>>> >>>>>>>>> Control-Space Bar actually puts the transport into a Pause with >>>>>>>>> Pre-Prime for instant playback. This is what that means: >>>>>>>>> >>>>>>>>> If you have a large session, say, 24 tracks record enabled or even on >>>>>>>>> an LE system, say, 16 tracks ready to record in QuickPunch mode, the >>>>>>>>> system is going to allocate drive space, prepare voices, automation >>>>>>>>> data (if there is any) and a few other things. If you simply start >>>>>>>>> the recording or even playback, there will be a pause before the >>>>>>>>> transport engages. This can vary from a second to several seconds if >>>>>>>>> it's a particularly large session. In order to have a more immediate >>>>>>>>> start to playback, it's possible to pre-prime the deck, as they say, >>>>>>>>> for instant playback or recording. Pressing Control-Space Bar puts >>>>>>>>> Pro Tools into this Pause mode. Simply pressing the Space Bar after >>>>>>>>> that instantly starts playback. Further, Control-Command-Space Bar >>>>>>>>> puts PT into Pre-Primed Record mode so pressing Space Bar after that >>>>>>>>> instantly puts the Transport into record mode. >>>>>>>>> >>>>>>>>> Pausing the transport, the way most people think of pausing >>>>>>>>> something, is a bit different. Pro Tools has two main behaviors: 1. >>>>>>>>> Is for the transport to remember the start position and, if the >>>>>>>>> transport is stopped, it will keep resuming playback from the same >>>>>>>>> start position unless that start position is specifically changed, >>>>>>>>> and 2. Insertion following Playback which means that wherever you >>>>>>>>> press the space bar, the transport will keep the insertion point >>>>>>>>> there and, upon pressing space bar again, will continue playing from >>>>>>>>> that location. >>>>>>>>> >>>>>>>>> I would strongly suggest using the default method which is for the >>>>>>>>> insertion point to not follow playback. Here's the reason. When you >>>>>>>>> make a selection, pressing the space bar will play only the selected >>>>>>>>> range. No matter how many times you press play, it'll only play the >>>>>>>>> selected range. This is a good means to verify your selection range >>>>>>>>> quickly without even having to look at the start, End and Length >>>>>>>>> fields in the edit window. From there, one can cut, copy paste, etc. >>>>>>>>> Now, if the insertion point follows playback, as soon as you play the >>>>>>>>> selection, the selection is actually lost. It's very obvious to a >>>>>>>>> sighted user but it can be confusing to a blind user. >>>>>>>>> >>>>>>>>> Here are two things one can do for alternatives: >>>>>>>>> >>>>>>>>> 1. If you really want to get into that other mode where it just >>>>>>>>> pauses when you hit the space bar, pressing Control-n toggles this >>>>>>>>> playback mode and the preference is also in the Setups>Preferences >>>>>>>>> dialog and is called "Insertion Follows Playback." >>>>>>>>> >>>>>>>>> 2. If the transport is engaged, and you find a spot you want to start >>>>>>>>> playback from, simply pressing the down arrow will automatically >>>>>>>>> populate the start field with the current transport value. In other >>>>>>>>> words, if, while the transport is engaged, you press the down arrow >>>>>>>>> at the 2 minute mark, the start field will now say "2:00:000" and if >>>>>>>>> you press space bar, the transport will stop but, upon playback, will >>>>>>>>> now start from the 2 minute mark. >>>>>>>>> >>>>>>>>> Hopefully, that makes sense. Let me know if there's something that >>>>>>>>> isn't clear. >>>>>>>>> >>>>>>>>> Best, >>>>>>>>> >>>>>>>>> Slau >>>>>>>>> >>>>>>>>> On Jul 17, 2010, at 1:23 PM, clarence griffin wrote: >>>>>>>>> >>>>>>>>>> I thought control + Space was to pause my project? Its not working. >>>>>>>>>> Is there something I have to turn on in setup or something? I looked >>>>>>>>>> all over, and didn't find anything. >>>>>>>>>> Thanks. >>>>>>>>>> >>>>>>>>>> GF >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > > > >
