I do agree with you, and i do apologize if i came off as trying to correct you 
or saying you shouldn't put a compressor on the master track. It was intended 
more as a suggestion or tip that i came across  in my own journey in learning 
more about PT, and figured i'd would share another way of doing it with the 
list.
On Oct 16, 2011, at 10:49 AM, Slau Halatyn wrote:

> As with most things, there's more than one way to accomplish a task and this 
> is one of them. Some people put compressors on the master track, some don't. 
> I'm simply illustrating one of its uses.
> 
> Slau
> 
> On Oct 16, 2011, at 10:02 AM, Stephen Martin wrote:
> 
>> I have read in a few  places where they don't always recommend putting a 
>> master compressor on the master track, since the master track unlike all the 
>> other tracks in pro tools has the fader before the inserts and sends, which 
>> means if u put a compressor on the master track, set it up how u like, then 
>> later adjust the master fader, it will pretty much cause you to have to go 
>> redo the compressor settings. A work around is to create a sub mimix aux 
>> track and send all your tracks to that, add all your master effects on that 
>> track and output that to the master track.
>> 
>> On Oct 16, 2011, at 9:54 AM, Slau Halatyn wrote:
>> 
>>> Christopher,
>>> 
>>> Master tracks control the output level being fed to an output bus. Most 
>>> often, a master track will control the main left and right outputs for a 
>>> stereo mix. It's not necessary to necessarily use a master track for a 
>>> regular mix but it certainly does help to create a master track to see the 
>>> combined level of all of the individual tracks on the master track's level 
>>> meter. Further, when putting bus compression over an entire mix, it would 
>>> normally be done with a compressor plug-in on a master track. Finally, 
>>> master tracks are used when creating stems for surround mixes, alternate 
>>> mixes, instrumental versions, etc. Again, most people just use a single 
>>> master track for overall mix purposes.
>>> 
>>> HTH,
>>> 
>>> Slau
>>> 
>>> 
>> 
> 

Reply via email to