Hi:
Well, I only use them on windows because I have the pci card which isn't
supported on the mac. I would need to get the firewire interface to use it
on the mac and the word on the street is that it can only be used during
mixdown because of latency issues. And it would be a pretty expensive
proposition because I would have to buy second licenses for all the plugs I
would want to use.
Gord
-----Original Message-----
From: Chuck Reichel
Sent: Monday, October 17, 2011 3:09 PM
To: [email protected]
Subject: Re: recommendation for a good rtas channel strip
Hi Gordon,
I have heard good stuff about "uad plugs"
Are they accessible with VoiceOver is my first question.
and how much?
What channel strips from uad would you recommend?
Talk soon
On Oct 17, 2011, at 2:46 PM, Gordon Kent wrote:
Oh I have the horse power. I was just looking for better stuff than the
stock digi stuff. I have so much great vst stuff around, especially the
uad plugs so I'm spoiled.
Gord
-----Original Message----- From: Chuck Reichel
Sent: Monday, October 17, 2011 1:08 PM
To: [email protected]
Subject: Re: recommendation for a good rtas channel strip
Hi Monkey & Gordon,
If you have the Horse power use separate inserts for each Plug-in.
After all you have 10 of them in PT!
If you want the waves fader mapping contact me off list.
Once you hear the Waves H-comp you'll never go back! LOL
From my experience channel strips have tons of stuff to manage in the
same plug window and even with a control 24 with 24 faders you half to
bank down to much to get to what you want to manipulate.
YMMV
Talk soon
On Oct 17, 2011, at 11:29 AM, Monkey Pusher wrote:
The waves stuff does have some RTAS plugs as well, however they
aren't very accessible at-least with out mapping the control to a
control surface from what i have read on here. However From what i
understand the Izotope stuff should be VO friendly and Izotope said
that do do some basic VO testing with all their Plugs now and welcome
feedback. Nectar is their vocal channel strip, alloy is there general
purpose channel strip, and ozone is their mastering oriented channel
strip. I believe there should be free demos on the www.izotope.com
site to check out. Been meaning to check these out and post my
experiences myself, but working on mastering editing with PT before i
get back into mixing again so haven't gotten around to it yet. Post
your experiences please if you try them before i do.
On 10/16/11, Gordon Kent <[email protected]> wrote:
Are there any good channel strip plugs that will work with VO and PT.
It
seems that most of the waves stuff is for native setups, but maybe I
have
that wrong. I would just like to get something better than the stock
eq's
and compressor. The factory plug-ins have been around since pt6 and
maybe
earlier than that. The bomb factory compressor is a bit better, but
it
would be nice to have a strip with comp/eq/tube distortion etc.
Gord
-----Original Message-----
From: Slau Halatyn
Sent: Sunday, October 16, 2011 11:20 AM
To: [email protected]
Subject: Re: Master Tracks?
No worries, I didn't take it that way at all. It's definitely an
aspect of
using the master track that one should consider. At this point, I
think the
issue of pre versus post fader compression is beyond the question when
someone is just trying to get their head around Pro Tools in general,
that'sl all.
Cheers,
Slau
On Oct 16, 2011, at 11:03 AM, Stephen Martin wrote:
I do agree with you, and i do apologize if i came off as trying to
correct
you or saying you shouldn't put a compressor on the master track. It
was
intended more as a suggestion or tip that i came across in my own
journey
in learning more about PT, and figured i'd would share another way of
doing it with the list.
On Oct 16, 2011, at 10:49 AM, Slau Halatyn wrote:
As with most things, there's more than one way to accomplish a task
and
this is one of them. Some people put compressors on the master
track,
some don't. I'm simply illustrating one of its uses.
Slau
On Oct 16, 2011, at 10:02 AM, Stephen Martin wrote:
I have read in a few places where they don't always recommend
putting a
master compressor on the master track, since the master track
unlike all
the other tracks in pro tools has the fader before the inserts and
sends, which means if u put a compressor on the master track, set
it up
how u like, then later adjust the master fader, it will pretty much
cause you to have to go redo the compressor settings. A work around
is
to create a sub mimix aux track and send all your tracks to that,
add
all your master effects on that track and output that to the master
track.
On Oct 16, 2011, at 9:54 AM, Slau Halatyn wrote:
Christopher,
Master tracks control the output level being fed to an output bus.
Most
often, a master track will control the main left and right outputs
for
a stereo mix. It's not necessary to necessarily use a master track
for
a regular mix but it certainly does help to create a master track
to
see the combined level of all of the individual tracks on the
master
track's level meter. Further, when putting bus compression over an
entire mix, it would normally be done with a compressor plug- in on
a
master track. Finally, master tracks are used when creating stems
for
surround mixes, alternate mixes, instrumental versions, etc.
Again,
most people just use a single master track for overall mix
purposes.
HTH,
Slau
Chuck Reichel
954-742-0019
www.SoundPictureRecording.com
Chuck Reichel
954-742-0019
www.SoundPictureRecording.com