Also remember, just cuz you recorded it doesn't mean it has to stay. Cutting or muting things can be just as valuable an asset in a dense mix as well. Best of luck, if you do a mix revision please post as well for us to check out.
On 9/17/13, matt diemert <mcdiem...@gmail.com> wrote: > Thanks all for the comments. > I've mixed before in other daws, namely reaper, and audacity, but back > in march or april a good friend of mine came in to town from Nashville > and spent 3 weeks with me showing me everything he could about PT. > From then onward, I've been on a quest to redo a lot in PT. I find > editing so much nicer in PT. > I was going for a sound here that had a tight bass and kick drums > sound, and I worked to keep the vocal just above the music. > There is a lot going on as there was 5 mics on the amp so obviously > mixing those in to a sub group, and treating them with EQ and > compression ETC. > There is actually about 4 or 5 different guitar tracks going on at a > time, so I'll have to look to see which should go down and which could > stay where they are. > Thanks again. > I've got more things that I'm trying my hand at if anyone would be > intrested in listening. > > > > On 9/16/13, Ricky Prevatte <rickypreva...@gmail.com> wrote: >> I say bring those vocals up what everyone else did. For the first time I >> thought it was absolutely great. You had good playing there are things >> that >> I would do to the drums but I am a drummer. I would maybe wet the vocal a >> little bit with some reverb I would use maybe a little more effects on >> some >> of the guitars. Did you use any compression only overall mix? Did you say >> you played all of the instruments? If you did that you did better than >> great >> on your first time. >> >> Ricky Prevatte LMBT1154 >> >> On Sep 16, 2013, at 9:13 PM, "Mark Gilland" <clgillan...@gmail.com> >> wrote: >> >>> Now that you mention it, it does kind a have a Gaither kind of feel to >>> it. >>> I never thought about that, but you have a good point. >>> >>> Chris. >>> >>> ----- Original Message ----- From: "Poppa Bear" <heavens4r...@gmail.com> >>> To: <ptaccess@googlegroups.com> >>> Sent: Monday, September 16, 2013 9:03 PM >>> Subject: Re: One of my first mixes in PT >>> >>> >>>> I like it brother Matt, sounds like some Gathor type influence there. >>>> Would like to hear that voice on a slow Gospel tune. Like Byran said, >>>> the >>>> vocals could be louder, but I think that you should push the guitars >>>> down >>>> a few DB a little, it is good playing, but your vocals are nice and >>>> rich >>>> and I would make sure that you let them shine over the guitar. What is >>>> the DB on your mane BUS/Master sitting at? Over all, very good job for >>>> your first run. Keep it up, I would like to hear more. >>>> ----- Original Message ----- From: "byron harden" >>>> <sticomu...@gmail.com> >>>> To: <ptaccess@googlegroups.com> >>>> Sent: Monday, September 16, 2013 4:16 PM >>>> Subject: Re: One of my first mixes in PT >>>> >>>> >>>>> i think its pretty cool. >>>>> >>>>> just a little more vocals, >>>>> >>>>> about 3DB worth. >>>>> >>>>> little less kick and bass. >>>>> >>>>> >>>>> i know that would take it to the next level. >>>>> >>>>> this sounds nice , >>>>> >>>>> >>>>> there is a lot more that could be done to it. >>>>> but if this is your first mix, >>>>> it sounds like a great start. >>>>> keep >>>>> On Sep 16, 2013, at 5:17 PM, matt diemert <mcdiem...@gmail.com> wrote: >>>>> >>>>>> Just thought I'd throw this out there for some ideas on what could be >>>>>> better ETC. >>>>>> If you're offended by hymns you may not want to listen other wise, >>>>>> I'd >>>>>> appreciate any comments. >>>>>> I played much of this obviously recorded and mixed in PT 10 >>>>>> >>>>>> http://www.soundclick.com/player/single_player.cfm?songid=12499545&q=hi >>>>>> >>>>>> >>>>>> >>>>>> On 9/16/13, Poppa Bear <heavens4r...@gmail.com> wrote: >>>>>>> Your fine, I'm glad you pointed it out, I wouldn't want to be >>>>>>> thinking >>>>>>> I'm >>>>>>> giving somebody a good deal and they could get it for almost a >>>>>>> hundred >>>>>>> or >>>>>>> more less right on Ebay. Thems the breaks. >>>>>>> ----- Original Message ----- >>>>>>> From: "Matt Diemert" <mcdiem...@gmail.com> >>>>>>> To: <ptaccess@googlegroups.com> >>>>>>> Sent: Monday, September 16, 2013 8:40 AM >>>>>>> Subject: Re: good remote control surfaces >>>>>>> >>>>>>> >>>>>>> Papa, sorry of my tone seemed accusatory, that certainly wasn't my >>>>>>> point! I >>>>>>> >>>>>>> was simply pointing out that over the last three months or so, all >>>>>>> the >>>>>>> options that I have been in on ended somewhere between 250 and $325. >>>>>>> Anything above that seems not to really sell. >>>>>>> >>>>>>> Sent from my iPhone >>>>>>> >>>>>>> On Sep 16, 2013, at 12:08 PM, "Poppa Bear" <heavens4r...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Hello Matt, at first I was a little put out about what you said, >>>>>>>> but >>>>>>>> I >>>>>>>> went and checked them out on Ebay and they are much lower than they >>>>>>>> were >>>>>>>> just a year ago. If somebody on here wanted to pick it up I would >>>>>>>> go >>>>>>>> down >>>>>>>> >>>>>>>> to $300. Keep in mind, many of the lower $200 and under are the 002 >>>>>>>> rack. >>>>>>>> >>>>>>>> I did see a 002 rack with the black lion mod which was only about >>>>>>>> $450 or >>>>>>>> >>>>>>>> so, and that is a good deal, but it is not really considered >>>>>>>> portable. >>>>>>>> Take care >>>>>>>> ----- Original Message ----- From: "Matt Diemert" >>>>>>>> <mcdiem...@gmail.com> >>>>>>>> To: <ptaccess@googlegroups.com> >>>>>>>> Cc: <ptaccess@googlegroups.com> >>>>>>>> Sent: Monday, September 16, 2013 2:57 AM >>>>>>>> Subject: Re: good remote control surfaces >>>>>>>> >>>>>>>> >>>>>>>>> 400 is probably a bit high by say eBay standards. Though many are >>>>>>>>> listed >>>>>>>>> >>>>>>>>> in this range the ones that actually sell are closer to the $250 >>>>>>>>> $325 >>>>>>>>> range. I've been in on several auctions for a 002 over the last >>>>>>>>> month and >>>>>>>>> >>>>>>>>> this is what I've experienced. >>>>>>>>> >>>>>>>>> Sent from my iPhone >>>>>>>>> >>>>>>>>> On Sep 16, 2013, at 12:03 AM, Scott Chesworth >>>>>>>>> <scottcheswo...@gmail.com> >>>>>>>>> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Only downside to the 002 is no scrub wheel. However, assuming >>>>>>>>>> used >>>>>>>>>> gear goes for roughly the same value in the sates as it does here >>>>>>>>>> in >>>>>>>>>> the UK, that's a good price for one. >>>>>>>>>> >>>>>>>>>> On 9/16/13, TheOreoMonster <monkeypushe...@gmail.com> wrote: >>>>>>>>>>> I believe it was discontinued for the 003, but as it was said, a >>>>>>>>>>> lot >>>>>>>>>>> of >>>>>>>>>>> people/places still use the 002. >>>>>>>>>>> On Sep 15, 2013, at 10:29 PM, "Poppa Bear" >>>>>>>>>>> <heavens4r...@gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Nope, but I know small project studios that are still using >>>>>>>>>>>> them >>>>>>>>>>>> with >>>>>>>>>>>> >>>>>>>>>>>> no >>>>>>>>>>>> problems. My partner and I both had one in our control room, he >>>>>>>>>>>> is >>>>>>>>>>>> still >>>>>>>>>>>> using his. >>>>>>>>>>>> ----- Original Message ----- From: "Jed Barton" >>>>>>>>>>>> <j...@jedbarton.com> >>>>>>>>>>>> To: <ptaccess@googlegroups.com> >>>>>>>>>>>> Sent: Sunday, September 15, 2013 6:24 PM >>>>>>>>>>>> Subject: RE: good remote control surfaces >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Oh wow, >>>>>>>>>>>>> Do they still make this surface new? >>>>>>>>>>>>> >>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>> From: ptaccess@googlegroups.com >>>>>>>>>>>>> [mailto:ptaccess@googlegroups.com] >>>>>>>>>>>>> On >>>>>>>>>>>>> Behalf >>>>>>>>>>>>> Of Poppa Bear >>>>>>>>>>>>> Sent: Sunday, September 15, 2013 10:16 PM >>>>>>>>>>>>> To: ptaccess@googlegroups.com >>>>>>>>>>>>> Subject: Re: good remote control surfaces >>>>>>>>>>>>> >>>>>>>>>>>>> I still have a Degidesign 002 that I will let go for $400. It >>>>>>>>>>>>> is >>>>>>>>>>>>> in >>>>>>>>>>>>> very >>>>>>>>>>>>> good condition, still have the packaging. >>>>>>>>>>>>> ----- Original Message ----- >>>>>>>>>>>>> From: "TheOreoMonster" <monkeypushe...@gmail.com> >>>>>>>>>>>>> To: <ptaccess@googlegroups.com> >>>>>>>>>>>>> Sent: Sunday, September 15, 2013 5:47 PM >>>>>>>>>>>>> Subject: Re: good remote control surfaces >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> if you want one that doubles as a control surface, the 003 is >>>>>>>>>>>>>> probably >>>>>>>>>>>>>> a good place to start. Otherwise, if you are in the states, >>>>>>>>>>>>>> you >>>>>>>>>>>>>> may >>>>>>>>>>>>>> want to contact a store like www.sweetwater.com and talk to a >>>>>>>>>>>>>> sales >>>>>>>>>>>>>> engineer who can help you decide on something. >>>>>>>>>>>>>> On Sep 14, 2013, at 8:29 AM, Jed Barton <j...@jedbarton.com> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hey guys, >>>>>>>>>>>>>>> Alright, I am about to make the jump to buy protools, but >>>>>>>>>>>>>>> before I >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> do >>>>>>>>>>>>>>> I need a suggestion for a remote control surface. I know >>>>>>>>>>>>>>> there >>>>>>>>>>>>>>> are >>>>>>>>>>>>>>> so many out there. >>>>>>>>>>>>>>> Having one with a scrub wheel would be extremely helpful. >>>>>>>>>>>>>>> Any ideas? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>> Jed >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google >>>>>>>>>>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from >>>>>>>>>>>>>>> it, >>>>>>>>>>>>>>> send an email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google >>>>>>>>>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, >>>>>>>>>>>>>> send >>>>>>>>>>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google >>>>>>>>>>>>> Groups >>>>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, >>>>>>>>>>>>> send >>>>>>>>>>>>> an >>>>>>>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google >>>>>>>>>>>>> Groups >>>>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, >>>>>>>>>>>>> send an >>>>>>>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google >>>>>>>>>>>> Groups >>>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, >>>>>>>>>>>> send >>>>>>>>>>>> >>>>>>>>>>>> an >>>>>>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>>>> For more options, visit >>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google >>>>>>>>>>> Groups >>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, >>>>>>>>>>> send >>>>>>>>>>> >>>>>>>>>>> an >>>>>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>>> For more options, visit >>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google >>>>>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send >>>>>>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups >>>>>>>>> >>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an >>>>>>>>> >>>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups >>>>>>>> >>>>>>>> "Pro Tools Accessibility" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an >>>>>>>> >>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups >>>>>>> "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send >>>>>>> an >>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups >>>>>>> "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send >>>>>>> an >>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>>> >>>>>> -- >>>>>> Warm Regards: >>>>>> Matt Diemert >>>>>> 330-980-0046 >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send >>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > > -- > Warm Regards: > Matt Diemert > 330-980-0046 > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
