I'm not totally sure regarding the whole server issue. I'll need to look into that in more detail too I think. In the meantime, I've borrowed an m box and a small USB Behringer surface to get me through the last few weeks of college, but obviously this is not a long term solution. It did get me thinking though and maybe I'm totally clutching at straws here... There is no problem with the latest version of mavericks, pro tools eleven point one and anything I have connected via USB, including daisy chain connections through my USB numpad. Its probably a long shot but what about trying a Firewire to USB adaptor? Nothing to lose I suppose so I'll try get hold of one and hook the Digi up that way and post my findings back here afterwards. Not holding my breath though...
Alan, Oban, Scotland Sent from my iPhone > On 24 May 2014, at 23:24, Nick Gawronski <n...@nickgawronski.com> wrote: > > Hi, I setup server to run tasks as I went into the services I wanted turned > on and enabled them. Once this is done is there no way to go back or turn > everything but pro tools and voiceover off so just those portions that are > needed for pro tools are running? Nick Gawronski >> On 5/21/2014 7:02 PM, TheOreoMonster wrote: >> did you actually set up server to perform task? or did you just download it >> from the app store and never launched it? >>> On May 21, 2014, at 6:32 PM, Nick Gawronski <n...@nickgawronski.com> wrote: >>> >>> Hi, How do you kill server as there are lots of different services it >>> starts and none of them are in the force close dialog? Would I have to go >>> in and disable them all one by one? Nick Gawronski >>>> On 5/21/2014 5:29 PM, TheOreoMonster wrote: >>>> Is the other person on here that had the same issue running server as >>>> well? Tryi killing server when working in your PT sessions to see if that >>>> improves things. >>>>> On May 21, 2014, at 5:13 PM, Nick Gawronski <n...@nickgawronski.com> >>>>> wrote: >>>>> >>>>> Hi, Yes that server program you can download from the app store. It is >>>>> called server.app should this service cause any major problems with pro >>>>> tools if not a lot of hits are being made to it as it is running on a >>>>> home network? Nick Gawronski >>>>>> On 5/20/2014 8:05 PM, Christopher-Mark Gilland wrote: >>>>>> Nick, >>>>>> >>>>>> What server are you referring to? O S X server? >>>>>> >>>>>> Chris. >>>>>> >>>>>> ----- Original Message ----- From: "Nick Gawronski" >>>>>> <n...@nickgawronski.com> >>>>>> To: <ptaccess@googlegroups.com> >>>>>> Sent: Tuesday, May 20, 2014 6:57 PM >>>>>> Subject: Re: pro tools 10 and 11 both crash during recording with the >>>>>> operating system held off interrupts for to long >>>>>> >>>>>> >>>>>>> Hi, I have tried using the drive and the digi 003 both over firewire >>>>>>> with no luck what so ever. Both devices are not seen by the system or >>>>>>> if they are just the drive and not the digi 003 by pro tools. I did >>>>>>> increase the buffer by one more setting and so far things are working >>>>>>> ok. Does the fact that I do run the server application mean anything >>>>>>> but in the past things were working fine can server keep pro tools from >>>>>>> working at it's best? Nick Gawronski >>>>>>>> On 5/19/2014 11:31 PM, TheOreoMonster wrote: >>>>>>>> try using a firewire or USB drive instead and see if the issue persist. >>>>>>>>> On May 19, 2014, at 11:53 PM, Nick Gawronski <n...@nickgawronski.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Hi, I have had this issue for a few days now in both pro tools 10 and >>>>>>>>> pro >>>>>>>>> tools 11. I have been recording and suddenly with no other programs >>>>>>>>> open >>>>>>>>> and spotlight disabled completely pro tools comes up with the dialog >>>>>>>>> that >>>>>>>>> says the operating system held off interrupts for to long and yes I >>>>>>>>> have >>>>>>>>> played around with the buffering and other settings in both playback >>>>>>>>> dialogs with both versions and when recording in pro tools 11 my mac >>>>>>>>> book >>>>>>>>> pro model late 2011 is running very hot. Also upon every exit of pro >>>>>>>>> tools 11 it says after saving the session that pro tools has crashed >>>>>>>>> and I >>>>>>>>> keep explaining what is going on with my system. I have a Digi 003 >>>>>>>>> and am >>>>>>>>> usually just recording one track when this happens. What could be >>>>>>>>> causing >>>>>>>>> these issues and how do I stop them as I always record to my external >>>>>>>>> drive connected with the esata express card which before was working >>>>>>>>> just >>>>>>>>> fine and no I have not done anything major with my system. Nick >>>>>>>>> Gawronski >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
