> On 12 Feb 2015, at 12:43 am, chad morrison <chadmorrisonmob...@gmail.com> > wrote: > > Items to use that technique when I was using sonar. I was able to achieve my > automation by writing a static pass beginning of the project and then > selecting the area I wanted the button to be turned on and automating it that > way. Thanks again for all the help. > > From Chad's iPhone > >> On Feb 11, 2015, at 7:59 AM, Slau Halatyn <slauhala...@gmail.com> wrote: >> >> Chad, >> >> Another way you can achieve this effect without getting into automation is >> to duplicate your vocal track and only have that track contain the words you >> wish to send to the delay. You can cut those from the original track and >> copy them into the second track. This technique seems more involved but if >> you want to avoid the whole automation thing, you can certainly take this >> approach as an alternative. >> >> Slau >> >>> On Feb 11, 2015, at 2:25 AM, chad morrison <chadmorrisonmob...@gmail.com> >>> wrote: >>> >>> Thanks guys! That helps a lot. I'm not currently using a control surface >>> so, thank you for the alternative directions. >>> >>> From Chad's iPhone >>> >>>> On Feb 10, 2015, at 10:23 PM, Mike Lockett <mloc...@gmail.com> wrote: >>>> >>>> Chad if you are working with out a control surface, >>>> assuming your vocal track is sending to the aux with your delay, >>>> put your aux track in automation and select it. >>>> now when the transport is engaged press “shift-M” to toggle the mute on >>>> and off… >>>> >>>>> On Feb 10, 2015, at 9:53 PM, Slau Halatyn <slauhala...@gmail.com> wrote: >>>>> >>>>> Hi Chad, >>>>> >>>>> I'm assuming you have an aux input with the delay plug-in instantiated >>>>> and that a send is routed to a bus which is being received by the aux >>>>> input. >>>>> >>>>> In the automation window, enable Send Mute automation. With a control >>>>> surface, the following procedure is simple. You mute the send, set the >>>>> track's automation to Write and engage the transport. Without a surface, >>>>> you'll need to go to the Track's output window to the sends section and >>>>> mute the send and then enable Write mode and engage the transport. >>>>> >>>>> Wherever you want the track to send to the delay, you'll need to click >>>>> the Mute button to toggle its state. Again, with a control surface, it's >>>>> quite easy and intuitive. If your unmuted sections are particularly short >>>>> and you find it tough to perform the button presses in quick succession, >>>>> you can use a slightly different method for the mute automation. Start >>>>> with muting and engaging the transport in write mode. Select the word or >>>>> words you wish to unmute to the delay, make sure you're still in Write >>>>> mode, unmute the send and engage the transport. The track will only play >>>>> for the duration of the selected word or words. Automation will be >>>>> written for that section as unmuted and will revert to the muted state >>>>> after the selection. You can repeat this process for each word or section. >>>>> >>>>> By default, automation is set to change to Auto Touch after an automation >>>>> pass so you'll have to switch back to Auto Write each time you select the >>>>> word or words. Be aware, however, that when you engage the transport, >>>>> you'll be writing the current mute state so you need to make sure >>>>> everything is correct before engaging the transport. With a surface, it's >>>>> fairly easy to just keep the automation in Auto Touch mode and use the >>>>> send mute button to unmute and mute on the fly for each section that >>>>> requires the automation. >>>>> >>>>> Hope that helps, >>>>> >>>>> Slau >>>>> >>>>>> On Feb 10, 2015, at 7:00 PM, chad morrison >>>>>> <chadmorrisonmob...@gmail.com> wrote: >>>>>> >>>>>> Hello guys, >>>>>> Sorry about all the questions lately. However, I do have one more. Could >>>>>> someone please explain the procedure for muting the send button. I'm >>>>>> trying to have a delay on only certain words during the vocal track. >>>>>> Thank you very much for your time, Chad >>>>>> >>>>>> From Chad's iPhone >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.
-- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
