Hi chad, Just to ad 1 more thing to try. Command tab over to the desk top & turn off VoiceOver several times and this sometimes clears up the "Busy" PT thing. Then command tab back to pt and find out! :) YMMV Chuck
On Feb 11, 2015, at 3:13 PM, chad morrison wrote: > I find that sometimes I just have to restart voiceover and it stops giving me > the busy message. > > From Chad's iPhone > >> On Feb 11, 2015, at 11:32 AM, Poppa Bear <heavens4r...@gmail.com> wrote: >> >> When was the last time you restarted your laptop Steve? I find that if I >> leave my box on for days at a time that things can sometimes get a little >> shaky, not too often, but there has been a hand full of times when a restart >> has done the trick. >> >> -----Original Message----- >> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf >> Of Steve Sparrow >> Sent: Wednesday, February 11, 2015 8:27 AM >> To: ptaccess@googlegroups.com >> Subject: Re: applying pitch correction to selection >> >> the steps i followed were from protools with speech. I followed along with >> nuts and bolts >>> . Is there anything else i have to configure. >> >> How ever. >>> I am pleased to know what the issue is. . This is only a basic lap top. I >>> have a new machine coming soon. >> How ever, if there are more configurations, please let me know. >> Steve >> >>> On 12 Feb 2015, at 3:11 am, Slau Halatyn <slauhala...@gmail.com> wrote: >>> >>> Something's wrong with your system, possibly in its capabilities or >>> configuration. Did you follow all of the steps recommended for configuring >>> your system for Pro Tools? >>> >>> Slau >>> >>>> On Feb 11, 2015, at 11:59 AM, Poppa Bear <heavens4r...@gmail.com> wrote: >>>> >>>> Strange Steve. I myself don't go into the play list, I just go to the >>>> track view, select the track then select the portion of audio, go to the >>>> audio sweet and select the affect and apply, it usually takes about two to >>>> three seconds depending on the length of the selection. >>>> >>>> -----Original Message----- >>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On >>>> Behalf Of Steve Sparrow >>>> Sent: Wednesday, February 11, 2015 7:41 AM >>>> To: ptaccess@googlegroups.com >>>> Subject: applying pitch correction to selection >>>> >>>> Hi. how does one go about applying effects from plugins to small >>>> selections in a track. . I tried this yesterday, and ran in to issues.I >>>> wanted to add some pitch correction to a vocal track, i used pitch 2 i >>>> think it was called >>>> Here is what i did. >>>> >>>> I selected my track in the track list. I then made a selection on my vocal >>>> track. I then went in to the menu and found audio sweet. So i downarrowed >>>> till i found pitch 2 i think it was called. I found all my parameters, for >>>> my experiment i just raised the pitch 1 semitone, i then hit the apply >>>> processing, and from then on my computer just sat there saying protools >>>> busy. This is as far as i got and tools just would not go any further. it >>>> just kept telling me pro tools busy. I gave it about 5 minutes or more, >>>> and had to restart the computer. >>>> I tried this method with the waves a p i 2500 and a reverb as well. i got >>>> the same thing each time. am i going about this process in the correct >>>> way. and if so, is this a glitch in my system. Or is there a better way to >>>> get this job done. >>>> Thanks again guys. >>>> Steve >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
