Hi. No. Not out of the box it's not... According to the web site you can buy an expansion card to add a USB audio interface... Talk about a deal breaker... USB? Really?
This seems to be a somewhat new product... These companies should be adding expansion cards with thunderbolt or firewire as far as an interface goes. I would never rely on USB in a recording situation nor do I know anybody else who would... Even for two tracks in and the master bus going back out, I still found USB to be unreliable. These companies are shooting themselves in the foot in my opinion. I for one would be willing to pay more for something like the ssl nucleus for example, if it had a built in expandable firewire or thunderbolt audio interface with eight mic preamps and adat etc. Yes, you do have the C24, but, we're talking about a totally different pricepoint, and, to my knowledge, that unit still only works with pro tools on the control surface side. You'd think they would make all of their control surfaces/digital mixers universally compatible by now like most everybody else has... Cameron. On 10/6/15, [email protected] <[email protected]> wrote: > Hi, > > It is also an audio interface > Listen to me spoken link below: > https://www.dropbox.com/s/fdn1hwdqe20nly8/moreabouttheqcon.mp3?dl=0 > > > > Mac > Verstuurd vanaf mijn iPhone > >> Op 6 okt. 2015 om 03:43 heeft Cameron Strife <[email protected]> >> het volgende geschreven: >> >> That is simply a control surface;there is no audio interface built in. >> >> >> >>> On 10/5/15, Nick Gawronski <[email protected]> wrote: >>> Hi, Is this a control surface as well as an interface and by default >>> what comes on the device like how many inputs and outputs like what >>> different types does it have? Nick Gawronski >>> >>>> On 10/5/2015 5:42 AM, [email protected] wrote: >>>> There also is the QCon Pro from Icon >>>> Works with Logic, Qbase, Abelton, Pro tools and more software >>>> Very good builtquality and nice priced. Motorized faders and expandable >>>> up >>>> to 32 channels >>>> I ve tried the unit and i. Am gonna buy it myself... >>>> Mac >>>> >>>> Verstuurd vanaf mijn iPhone >>>> >>>>> Op 4 okt. 2015 om 04:15 heeft Cameron Strife >>>>> <[email protected]> >>>>> het volgende geschreven: >>>>> >>>>> Hi. >>>>> >>>>> Sweetwater has all of your answers... >>>>> >>>>> Here's the short version: >>>>> >>>>> Yes, they require external power and most connect via USB. Your late >>>>> 2011 mac book pro should have two USB 2.0 ports, ethernet, a firewire >>>>> 800 port and an Intel Thunderbolt port and remember that you can use >>>>> many different adapters with the thunderbolt port as well as daisy >>>>> chaining devices so connection wise, you really have nothing to worry >>>>> about... >>>>> >>>>> As far as control surfaces with motorized faders that work with pt, >>>>> you have the Baranger x touch series, the older baranger BCF2000, >>>>> mackie control universal pro, the avid artist mix, avid S3, ssl >>>>> nucleas, and digital mixers with built in control surface layers like >>>>> the tascam dm2400 and the Baranger X32 producer etc. >>>>> >>>>> I hope that helps. >>>>> >>>>> Cameron. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> On 10/3/15, Nick Gawronski <[email protected]> wrote: >>>>>> Hi, What good control surfaces exist that still have moving controls >>>>>> and >>>>>> work with Pro Tools 12 and how would they connect to my mac book pro >>>>>> late model 2011 and do they require external power? Nick Gawronski >>>>>> >>>>>>> On 10/3/2015 8:22 PM, Cameron Strife wrote: >>>>>>> Hi. I'm selling a resident audio t2 thunderbolt interface with five >>>>>>> meter thunderbolt cable... Shoot me an e mail if interested. >>>>>>> >>>>>>> I would love to see a control surface with motorized faders and a >>>>>>> built in thunderbolt interface with eight or sixteen mic preamps etc >>>>>>> but who knows if we'll see something like that as you can't even >>>>>>> find >>>>>>> firewire options like that these days, (Not that there were that >>>>>>> many >>>>>>> in the first place!) >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Cameron. >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On 10/3/15, Nick Gawronski <[email protected]> wrote: >>>>>>>> Hi, I was reading on line that Pro Tools 12 is the last version to >>>>>>>> support the Digi 003 interface so I was wanting to buy something >>>>>>>> better >>>>>>>> and hopefully with better connections. I was reading on line about >>>>>>>> several thunder bolt interfaces are any of them accessible with Pro >>>>>>>> Tools and for a good control surface do any ones exist that are >>>>>>>> combined >>>>>>>> like the Digi 003 was or are they now two different parts now and >>>>>>>> are >>>>>>>> there any trade in options for my Digi 003 with the moving sliders? >>>>>>>> I >>>>>>>> would like somethink with combo jacks if possible and around 4 but >>>>>>>> hopefully more I am on normal Pro Tools 12. Nick Gawronski >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups >>>>>>>> "Pro Tools Accessibility" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send >>>>>>>> an >>>>>>>> email to [email protected]. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups >>>>>> "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send >>>>>> an >>>>>> email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an >>>>> email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
