FYI, off the top of my head I think everything that'd be required to generate DDP in Reaper should be usable on the Mac side. You'll need to read the relevant section of the help file, probably a few times, and will absolutely need to varify that what you've created works before delivering to the pressing plant as Reaper hasn't made DDP generation easy or pleasant yet. There's plenty of tiny details that are likely to be beyond the less geeky humanoid. It does work though.
Scott On 11/11/15, Chris Smart <[email protected]> wrote: > At 12:15 AM 11/11/2015, you wrote: >> >> So then, if we can't make that format on the mac now, then, what to do? > > > Not worry about it, unless you do lots of mastering for folks. > > > > >> ----- Original Message ----- From: "Slau Halatyn" <[email protected]> >> To: <[email protected]> >> Sent: Tuesday, November 10, 2015 11:51 PM >> Subject: Re: A question about bouncing >> >> >> Actually, most CD duplicators have preferred DDP for at least the last >> decade. Compact discs are not perfect and have inherent errors in the >> process of burning. The limit is about 500 errors as a threshold above >> which a cD will be rejected by the duplicator. A DDP file is not prone to >> write errors during a burn because it's just a digital copy of the master >> along with the requisite PQ subcodes built into the file. There's no need >> to translate to audio CD and then back from CD to the duplicating computer >> that creates the stamper. The process eliminates a couple of steps and is >> more reliable and, of course, faster. >> >> Slau >> >> On Nov 10, 2015, at 11:26 PM, Poppa Bear <[email protected]> wrote: >> >>> Honestly in all of the projects that I have been involved in over the >>> last twenty years that went to a CD duplication press or mastering house, >>> wave files, ADAT or a CD has always worked just fine. >>> >>> -----Original Message----- >>> From: [email protected] [ mailto:[email protected]] On >>> Behalf Of Christopher-Mark Gilland >>> Sent: Tuesday, November 10, 2015 7:15 PM >>> To: [email protected] >>> Subject: Re: A question about bouncing >>> >>> I was honestly kind a wonderring that same thing, Nick, to be frankly >>> honest >>> with you. >>> >>> Chris. >>> >>> ----- Original Message ----- From: "Nick Gawronski" >>> <[email protected]> >>> To: <[email protected]> >>> Sent: Tuesday, November 10, 2015 10:48 PM >>> Subject: Re: A question about bouncing >>> >>> >>>> Hi, That is strange that a CD duplication house does not want a master >>>> disc as everyone I have looked at did as their view point was the master >>>> disc had the exact layout of the duplicated or replicated discs that you >>>> wanted to sell to users or that you wanted them to make for you for >>>> whatever you were needing them for. I always burn my audio discs from >>>> uncompressed wav files if possible. Nick Gawronski >>>> On Tue, November 10, 2015 9:42 pm, Slau Halatyn wrote: >>>>> >>>>> Pro Tools doesn't do DDP. The only accessible program on the Mac side >>>>> that'll do that is Wave Burner by Apple which is no longer available. >>>>> >>>>> Slau >>>>> >>>>> >>>>> On Nov 10, 2015, at 10:21 PM, Christopher-Mark Gilland >>>>> <[email protected]> wrote: >>>>> >>>>> >>>>>> Guys, >>>>>> >>>>>> >>>>>> I'm not totally sure what he's talking about with this, but I promised >>>>>> I'd ask. >>>>>> >>>>>> >>>>>> A friend of mine who is right now, at least, exclusively a Reaper user >>>>>> wanted to know if Protools has a way of renderring, bouncing rather, a >>>>>> session out to a CD format. He said the format is called DDP. I'd >>>>>> never heard of it, but is this something we could do? >>>>>> >>>>>> Basically, he said a lot of masterring companies want you to send them >>>>>> the material without using physical discs, as that can sometimes cause >>>>>> errors, etc. So, he said usually, most companies will want a ddp of >>>>>> each track. Then, they remaster things, and send you back a physical >>>>>> disc glass master. >>>>>> >>>>>> I just wonder if you all know anything about this, or perhaps if this >>>>>> is something ProTools can do. He said if not, he finds that a major >>>>>> setback of PT, as this is such a common thing to do. >>>>>> >>>>>> Chris. >>>>>> >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to [email protected]. For more options, >>>>>> visit https://groups.google.com/d/optout. >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an >>>>> email to [email protected]. For more options, visit >>>>> https://groups.google.com/d/optout. >>>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> --- >>> This email has been checked for viruses by Avast antivirus software. >>> https://www.avast.com/antivirus >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > --- Learn to meditate and train your brain with Muse, the first lab-grade > EEG biofeedback headband for home use! > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
