Hi Ashley.
Thank you for getting back with me so quickly. You cannot know how appreciated
it is!
OK, so I'm a little bit confused. What is the difference between the
inspector, vs. the smart controls?
Chris.
----- Original Message -----
From: 'ashley cox' via Pro Tools Accessibility
To: ProTools Accessibility
Sent: Friday, December 04, 2015 11:05 AM
Subject: Re: Writing you off list about Logic
Chris,
You're correct. I’ve just switched to Logic, as my copy of PT11 no-longer
runs on El Capitan, and I think PT is ridiculously expensive and don’t want to
buy a new subscription.
To your question. You can edit plugin parameters using the inspector. Press
the letter I (or check the inspector box in the control bar). Then interact
with the inspector and find your track’s channel strip. You should find
everything you want in there.
HTH
Ash
On 4 Dec 2015, at 15:58, Christopher-Mark Gilland <[email protected]>
wrote:
Ashley,
I saw your messages on the PT Access list, but based on your question the
other day about the circular sliders, I thought I'd ask you this, since you
made it sound like you used Logic some. If i'm wrong, then forgive me.
Here's the situation. I have a karaoke track whic I imported on to an
audio track, then another audio track which I have recorded my vocal on. I
then made sure the vocal track was selected by interacting with my track
headers. Once done, I hit the letter y, to be sure my library was shown, and
not hidden. I've downloaded all like, 60 something odd gigs of Logic content,
so one of the things under here in the library categories is voice. I went
there, then to tuned vocal. OK, so here is the thing. I'm trying to figure
out now how I go about tweaking the actual settings within the patch I selected
in the library. I enabled smart controls, and I definitely! then see the smart
controls layout, and if I interact with that, I get things like dynamics,
tuning, and I think sends was the 3rd one. So, say I go into dynamics and
interact with it. I see a circular dial that is for compression, it's set...
hoal, I don't remember, somewhere around 17ish percent? Now, I can definitely
turn that up or down, although it's fairly suttle. but, that doesn't really
give me a lot of control. It's kind a just a blending dial if you will. So,
for example, how do I get to that actual compressor that the tuned voice patch
is using? I want to tweak it more fine tuned. I want to literally be able to
individually get into adjusting the threshold, the ratio, the release and
attack, etc. Is there not really a good accessible way a doing this? That
would be a heck of a deal breaker for me, if so.
Chris.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Pro
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
