Hi Fiore, One other thing: I just checked out the link to the "how it works" page and noticed a few instances of "continuous" being misspelled and I believe there was also a typo on "highly." I didn't check carefully but those did stick out—just an FYI.
Best, Slau On Dec 10, 2015, at 1:59 PM, [email protected] wrote: > Hi, > > thank you Slau for making it clear where to drop the plug-in > I'll adjust the README with your instructions that seem to be more screen > reader friendly > > As for how it works: > > You have to modes: clipping and continuous > > clipping mode : you set the threshold parameter and each time the audio > signal goes past the threshold you'll hear a short beep. By default the > threshold is set > to 0db so you won't hear anything unless your audio is distorting. But if > you're mixing and you want to keep, say, 6dB of headroom then just set it > to -6dB and keep, > > The continuous mode just plays a continuous sine wave which is mapped to the > audio level in dB. A possible usage of this mode is to understand if the > dynamic range is high or low by listening to the sine wave. High dynamic > range would result in a relevant change of the pitch of the sine wave, > whereas a sine wave more or less stable around the same pitch would reveal a > highly compressed sound. > > the modes can be switched with the Sonification Type parameter > > a more detailed description of the plug-in can be found at: > http://depic.eecs.qmul.ac.uk/apm/howitworks.html > > > > On Thursday, December 10, 2015 at 6:06:20 PM UTC, Brian Howerton wrote: > Ah, thanks for that Slau. That worked. The read me file was a little > confusing maybe how voiceover was reading it even after interacting with the > text to take a closer look at the file and folder path name. Anyway, got it, > now just don’t understand how it works, definitely understand the concept but > looking forward to seeing how it works with voiceover. Did find a little bug > with it at least on my system and setup though. When interacting with the > parameters, you can change them with voiceover, but if you want to change it > back, you can’t just interact and VO up and down arrow to change it back to > the previous setting. However, pressing VO space will reset it and change it > back. Maybe it’s not a bug, but maybe that’s how you do it, but anyway > that’s what I have noticed after having a quick look at it. > Brian > > On Dec 10, 2015, at 12:52 PM, Slau Halatyn <[email protected]> wrote: > > > > Hi Brian, > > Open your boot up drive. Go to Library. Open the Application Support > > folder. Go to Avid. Go to Audio then to plug-ins and paste it in there. > > reboot Pro Tools and you should see it. > > HTH, > > Slau > > > > On Dec 10, 2015, at 12:47 PM, Brian Howerton <[email protected]> wrote: > > > >> Hello folks, > >> I downloaded the accessible peak meter plugin for pro tools which was > >> released today, and I have read the read me for the plugin, and I thought > >> I put it in the right location, but it is not showing up in my plugins. > >> Where exactly do we put it. I am running pro tools 12.3. Also, would > >> really love to hear someone do an audio demo of this. I watched the > >> youtube video, but there are a couple of things I don’t understand. They > >> really did not show this in action so would love to hear how this thing > >> works. Thanks, > >> Brian > >> > >> -- > >> You received this message because you are subscribed to the Google Groups > >> "Pro Tools Accessibility" group. > >> To unsubscribe from this group and stop receiving emails from it, send an > >> email to [email protected]. > >> For more options, visit https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Pro Tools Accessibility" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
