Hi Brian, In this case, I believe I was simply referring to any send in the channel strip. However, after assigning a send, the track output window will open and, from here, you can do the same thing. The track output window can display either the main output or any of the sends. It's just a different interface to accomplish the same thing. The advantage of starting from the Mix window is that you have the track list available to make sure the correct tracks are selected. Once you've assigned any send, whether it's for a single track or multiple tracks, the track output window will automatically open. The previously selected tracks will still be selected. With the track output window open, you can, for example, call up Send B and route to a different bus with the same command to apply to all selected tracks. Otherwise, only the visible track in the window will be affected. Hope that makes sense, Slau
On Dec 30, 2015, at 7:19 PM, Brian Howerton <[email protected]> wrote: > Slap, > I happened to be going through my pro tools saved messages from this list and > found this message. Would you mind elaborating on something that you said in > your steps? You said to route the mouse to the send that you wish to use? > Where exactly would the sends be located? Are you referring to the sends in > the channel strips, or can you access the sends another way. I know how to > access the sends from within each channel strip, but that doesn’t seem to be > what you are referring too. I know this message was from a while back, but I > happened to find it and was re-reading so I wanted to reply to get > clarification on this. Thanks Slau, > Brian >> On Nov 9, 2015, at 10:01 AM, Slau Halatyn <[email protected]> wrote: >> >> Hi Martin, >> >> If your tracks are already selected, route the mouse pointer to the send you >> wish to use. Press Shift-option and click the track pad or mouse and select >> your routing choice. The same routing will be applied to all selected tracks. >> >> HTH, >> Slau >> >> On Nov 9, 2015, at 8:10 AM, Martin (Punky) Sopart <[email protected]> wrote: >> >>> Hello to the list! >>> >>> I want to create a send to a list of selected tracks. >>> Is this possible bei shift+option and clicking where? >>> >>> Thanks in advance! / Martin >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
