Hi Slau, Sorry, that was a badly phrased message on my part. I've made the necessary changes to the MCU-pro. Protools recognises it, so all that is good.
Where I need guidance, is, and this is just an example, tutorials on how to assign a track to a channel strip. How do I, again just for the sake of an example, ensure that the pan knob moves the track in the stereo field, or the fader adjusts the gain. See, told you they were basic questions! *smile* All the best, Dónal > On 18 May 2017, at 17:45, Slau Halatyn <[email protected]> wrote: > > Hi Donal, > > Since the Mackie surfaces can be used with several workstations, any > instructions would be provided by Mackie themselves. There are buttons and > knobs that will do one thing in one dAW and another thing in a different dAW. > Avid doesn't provide any specific information for third party surfaces. Those > surfaces would have to operate in some type of HUI emulation (again, a Mackie > standard) so I'd try looking there first. Most likely, you'd need to boot the > surface into some type of Pro Tools mode or HUI mode. I know a couple of > others on the list have had some experience with the Mackie surfaces. I'd > venture to say that the experience was not intuitive and somewhat successful > but I'll let them chime in. > Best, > Slau > >> On May 18, 2017, at 11:59 AM, Donal Fitzpatrick <[email protected]> >> wrote: >> >> Hi there peoples, >> >> Ok, this is probably so far beneath most of you that it doesn't bear asking, >> but I'm going to do so anyway. Before I do, I just want to give a >> disclaimer: I'm not an audio engineer, musician, or anything like that. >> I'm actually an assistant prof. who teaches software development and HCI >> who mucks around with audio stuff in whatever spare time is available. >> >> So to the point. I've got my hands on a Mackie MCU-Pro. I've connected it >> up to Protools, and opened the mixing session from the fantastic Protools >> with speech tutorials.. Now: Can any of you point me at an "idiot's guide" >> to using PT with a control surface? I've done my work (and it's basic basic >> stuff) using keyboard only thus far. I've produced a few podcasts, >> screencast audio tracks (and the like) but that's about it. however, I may >> be undertaking an M.Sc. in music technology in the autumn, and part of that >> is based around Protools; so I'm trying to get a head-start. >> >> Thanks again for any answers, and your patience. >> >> Donal >> >> Séanadh Ríomhphoist/Email Disclaimer >> >> Tá an ríomhphost seo agus aon chomhad a sheoltar leis faoi rún agus is lena >> úsáid ag an seolaí agus sin amháin é. Is féidir tuilleadh a léamh anseo. >> >> This e-mail and any files transmitted with it are confidential and are >> intended solely for use by the addressee. Read more here. >> >> >> >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to a topic in the Google > Groups "Pro Tools Accessibility" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ptaccess/XHC0TqzREXU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. -- *Séanadh Ríomhphoist/Email DisclaimerTá an ríomhphost seo agus aon chomhad a sheoltar leis faoi rún agus is lena úsáid ag an seolaí agus sin amháin é. Is féidir tuilleadh a léamh anseo. <https://www4.dcu.ie/iss/seanadh-riomhphoist.shtml>This e-mail and any files transmitted with it are confidential and are intended solely for use by the addressee. Read more here. <https://www4.dcu.ie/iss/email-disclaimer.shtml>* -- <https://www.facebook.com/DCU/> <https://twitter.com/DublinCityUni> <https://www.linkedin.com/company/dublin-city-university> <https://www.instagram.com/dublincityuniversity/?hl=en> <https://www.youtube.com/user/DublinCityUniversity> -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
