hi Slau, Lovely, that's all I needed to get me started. Much obliged.
Dónal > On 18 May 2017, at 20:37, Slau Halatyn <[email protected]> wrote: > > Hi Donal, > OK, briefly: > Tracks are not "assigned" to faders, per se. When all tracks are hidden, no > faders will be active. If you change the show/hide status of one track in the > track list table, the first fader will be that shown track, even if it's the > third track in the list. The faders reflect all shown tracks in order of > their appearance in the table. When you've shown more tracks than your > surface has, you'll have to bank over to the next set of tracks so that fader > 1 becomes the ninth shown track and fader 8 becomes the sixteenth shown track > and so on. > By default, most surfaces with encoder knobs will default to pan and the > faders will default to track volume. There are certainly a bunch more > functions but those are very standard. > HTH, > Slau > > >> On May 18, 2017, at 1:45 PM, Donal Fitzpatrick <[email protected]> >> wrote: >> >> Hi Slau, >> >> Sorry, that was a badly phrased message on my part. I've made the necessary >> changes to the MCU-pro. Protools recognises it, so all that is good. >> >> Where I need guidance, is, and this is just an example, tutorials on how to >> assign a track to a channel strip. How do I, again just for the sake of an >> example, ensure that the pan knob moves the track in the stereo field, or >> the fader adjusts the gain. >> >> See, told you they were basic questions! *smile* >> >> All the best, >> >> Dónal >>> On 18 May 2017, at 17:45, Slau Halatyn <[email protected]> wrote: >>> >>> Hi Donal, >>> >>> Since the Mackie surfaces can be used with several workstations, any >>> instructions would be provided by Mackie themselves. There are buttons and >>> knobs that will do one thing in one dAW and another thing in a different >>> dAW. Avid doesn't provide any specific information for third party >>> surfaces. Those surfaces would have to operate in some type of HUI >>> emulation (again, a Mackie standard) so I'd try looking there first. Most >>> likely, you'd need to boot the surface into some type of Pro Tools mode or >>> HUI mode. I know a couple of others on the list have had some experience >>> with the Mackie surfaces. I'd venture to say that the experience was not >>> intuitive and somewhat successful but I'll let them chime in. >>> Best, >>> Slau >>> >>>> On May 18, 2017, at 11:59 AM, Donal Fitzpatrick <[email protected]> >>>> wrote: >>>> >>>> Hi there peoples, >>>> >>>> Ok, this is probably so far beneath most of you that it doesn't bear >>>> asking, but I'm going to do so anyway. Before I do, I just want to give a >>>> disclaimer: I'm not an audio engineer, musician, or anything like that. >>>> I'm actually an assistant prof. who teaches software development and HCI >>>> who mucks around with audio stuff in whatever spare time is available. >>>> >>>> So to the point. I've got my hands on a Mackie MCU-Pro. I've connected >>>> it up to Protools, and opened the mixing session from the fantastic >>>> Protools with speech tutorials.. Now: Can any of you point me at an >>>> "idiot's guide" to using PT with a control surface? I've done my work >>>> (and it's basic basic stuff) using keyboard only thus far. I've produced >>>> a few podcasts, screencast audio tracks (and the like) but that's about >>>> it. however, I may be undertaking an M.Sc. in music technology in the >>>> autumn, and part of that is based around Protools; so I'm trying to get a >>>> head-start. >>>> >>>> Thanks again for any answers, and your patience. >>>> >>>> Donal >>>> >>>> Séanadh Ríomhphoist/Email Disclaimer >>>> >>>> Tá an ríomhphost seo agus aon chomhad a sheoltar leis faoi rún agus is >>>> lena úsáid ag an seolaí agus sin amháin é. Is féidir tuilleadh a léamh >>>> anseo. >>>> >>>> This e-mail and any files transmitted with it are confidential and are >>>> intended solely for use by the addressee. Read more here. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/ptaccess/XHC0TqzREXU/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> >> -- >> >> >> >> >> *Séanadh Ríomhphoist/Email DisclaimerTá an ríomhphost seo agus aon chomhad a >> sheoltar leis faoi rún agus is lena úsáid ag an seolaí agus sin amháin é. Is >> féidir tuilleadh a léamh anseo. >> <https://www4.dcu.ie/iss/seanadh-riomhphoist.shtml>This e-mail and any files >> transmitted with it are confidential and are intended solely for use by the >> addressee. Read more here. <https://www4.dcu.ie/iss/email-disclaimer.shtml>* >> >> >> -- >> >> <https://www.facebook.com/DCU/> <https://twitter.com/DublinCityUni> >> <https://www.linkedin.com/company/dublin-city-university> >> <https://www.instagram.com/dublincityuniversity/?hl=en> >> <https://www.youtube.com/user/DublinCityUniversity> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the Google > Groups "Pro Tools Accessibility" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ptaccess/XHC0TqzREXU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. -- *Séanadh Ríomhphoist/Email DisclaimerTá an ríomhphost seo agus aon chomhad a sheoltar leis faoi rún agus is lena úsáid ag an seolaí agus sin amháin é. Is féidir tuilleadh a léamh anseo. <https://www4.dcu.ie/iss/seanadh-riomhphoist.shtml>This e-mail and any files transmitted with it are confidential and are intended solely for use by the addressee. Read more here. <https://www4.dcu.ie/iss/email-disclaimer.shtml>* -- <https://www.facebook.com/DCU/> <https://twitter.com/DublinCityUni> <https://www.linkedin.com/company/dublin-city-university> <https://www.instagram.com/dublincityuniversity/?hl=en> <https://www.youtube.com/user/DublinCityUniversity> -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
