Most any thunderbolt interface is gonna have low enough latency so you can track through plug ins. The Focusrite Clarret is the best bang for the buck in that department, and while the Focusrite driver isn’t accessible, Focusrite support is great about “Remoting” into your system and setting stuff up for you. Also the iOS app is accessible (I tested it with a Clarret 8PreX) but you will need eyes to pair the iOS app with the app on your computer. If you don’t have eyes handy then Focusrite support can help you with this also so long as your computer and iOS device are on the same wi fi network. The apogee stuff generally has fully accessible drivers but may be a bit pricier. Though not sure on the Apogee element series of interfaces as those I believe are using a new driver but contact apogee support and ask. They seem to be VoiceOver aware over there and all Their other stuff have worked. As Chuck pointed out, the real time aspects of running UAD plug ins are not accessible, which means if you want to track through plug ins you will be doing it in pro tools which at that point you will loose any advantages of the Unison technology, and any other thunderbolt interface has low enough latency to work in this regards. My other issue with the UAD platform is the cost of the plug ins. A lot of the plug ins are also available in Native version and they generally are less expensive and or are on sale more frequently. So unless you know you want to use a lot of Plug ins exclusive to the UAD platform then it may not be worth the money. Regarding the MacBook Pro, The TouchBar will take some getting used to. As will the keyboard. And these are the main reasons everyone complains about them, that and you will need dongles or adapters to connect most things as there are few Thunderbolt 3/USB c devices available. However They are blazing fast and very light weight machines. (They are slightly thicker/heavier than a MacBook Air) So the decision regarding the MacBook is do you want something blazing fast thats future proof with some early adopter headaches like having to use dongles and get used to the touch bar (and remember you will need a full sized keyboard for pro tools use so you will have the option of using a different keyboard which will mean you will have hardware function keys again while its plugged in) Or You can get something slightly less powerful and have function keys and still have to deal with dongles and only have 2 ports instead of 4. I spent some time using a new 15” MacBook earlier this week as I worked on a project in logic with a friend, and personally I got used to the new keyboard a lot quicker than I thought I would and the speed left me a little envious. The only way you are gonna get a MacBook Pro with the Older USB 3 and Thunderbolts 2 ports if getting a 2015 pro or earlier. Those are still fast machines but unless Sweetwater still has stock of them you will have to find somewhere selling old stock or buy one use. Apple still has a 2015 model they sell new when I last looked but I personally wasn’t a fan considering you are paying for a 15” and still not getting discrete graphics. And if you are getting a 15” you may as well get the extra boost of discrete graphics. But thats just me nitpicking. Hope this novel of a response was helpful and let me know if you have any further questions.
> On Jul 21, 2017, at 2:25 PM, CHUCK REICHEL <soundpicturerecord...@gmail.com> > wrote: > > Hi Alex, > > The Apollo console app where you load the realtime plugs in to, is not > accessible yet. > in side pro tools the uad plugs and presets are very usable though. > I'm getting ready to re launch the UaD VoiceOver accessibility campaign. > Will advise. > > Chuck > > On Jul 21, 2017, at 1:07 PM, Alex Coleman wrote: > >> Is it advisable to get the latest MacBook Pro with the touch pad >> technology for use with Protools and Voiceover, or should I opt for >> the older model without the touch pad? >> I was told, by a Sweet Water rep, that I did not want the newest MBP >> model, but he didn't really say why. He was also not very knowledgable >> at all about accessibility issues. >> I need to make a purchase in the next few days, and any feedback would >> be appreciated. >> Also, is there a high-quality audio interface besides the Apollo 8 >> that is accessible using voiceover, or would the experts here >> recommend the Apollo? >> Thanks for any info you can provide. >> Take care. >> >> Alex >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
