Hello all! Reading the Pro Tools audio plug-in guide regarding de-essing I came across the De-Esser III. In my opinion the description of the "HF Only" button is contradictory. At first you'll find the following description:
"The Frequency (Freq) control sets the frequency band in which the De-Esser operates. When HF Only is disabled, gain is reduced in frequencies within the specified range. When HF Only is en- abled, the gain of frequencies above the specified value will be reduced." Some lines below that they further explain: "De-Esser III HF Only Control When the HF Only button is enabled, gain reduction is applied only to the active frequency band set by the Frequency control. When the HF Only button is disabled, the De-Esser applies gain reduction to the entire signal." Maybe my English isn't good enough, but the two descriptions for me aren't the same. Or does VoiceOver misinterpret the structure of the pdf file? Could someone illuminate me?... Thanks and best! / Martin -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/9AF1AACB-D3BB-4AB4-A902-A95B4A43C6EB%40cakewalker.de.
