Hello, I've been working with this board support package. The package and documentation are quite good and easy to work with. Thanks for the good work.
I have the board booting from flash, with the jffs2 root file system. The jffs2 file system starts mounted as read-only. I've tested remounting it read/write, but then I get the following flash write errors whenever I attempt to write a file: ------------- phys_mapped_flash: buffer write error (status timeout) Write of 68 bytes at 0x004b69d0 failed. returned -62, retlen 0 Not marking the space at 0x004b69d0 as dirty because the flash driver returned retlen zero SR.4 or SR.5 bits set in buffer write (status b0b0). Clearing. phys_mapped_flash: buffer write error (status timeout) Write of 68 bytes at 0x004b69d0 failed. returned -62, retlen 0 Not marking the space at 0x004b69d0 as dirty because the flash driver returned retlen zero Write error: Timer expired -------------- Let me know if there is something I'm doing wrong, or if the problem is already solved. Thanks, Joey Nelson President JoeScan, Inc. www.joescan.com 360-993-0069 -- ptxdist mailing list [email protected]
