From: Carsten Schlote <[email protected]> This packet provides IPV6 networking with the teredo protocol. The protocol allows for instant IPV6 networking without any kind of registration or setup.
Default generic files are taken from miredo sources. Signed-off-by: Carsten Schlote <[email protected]> --- generic/etc/init.d/miredo-server | 89 ++++++++++++++++++++++++++++++ generic/etc/miredo/client-hook | 70 ++++++++++++++++++++++++ generic/etc/miredo/miredo-server.conf | 22 ++++++++ generic/etc/miredo/miredo.conf | 35 ++++++++++++ patches/miredo-1.2.2/autogen.sh | 1 + patches/miredo-1.2.2/series | 3 + rules/miredo.in | 19 +++++++ rules/miredo.make | 96 +++++++++++++++++++++++++++++++++ 8 files changed, 335 insertions(+), 0 deletions(-) create mode 100644 generic/etc/init.d/miredo-server create mode 100644 generic/etc/miredo/client-hook create mode 100644 generic/etc/miredo/miredo-server.conf create mode 100644 generic/etc/miredo/miredo.conf create mode 120000 patches/miredo-1.2.2/autogen.sh create mode 100644 patches/miredo-1.2.2/dummy.patch create mode 100644 patches/miredo-1.2.2/series create mode 100644 rules/miredo.in create mode 100644 rules/miredo.make diff --git a/generic/etc/init.d/miredo-server b/generic/etc/init.d/miredo-server new file mode 100644 index 0000000..271d173 --- /dev/null +++ b/generic/etc/init.d/miredo-server @@ -0,0 +1,89 @@ +#! /bin/sh +# $Id: miredo-server.init 1754 2006-09-18 14:25:04Z remi $ +# +# miredo-server start/stop script for Debian GNU/Linux +# Author: Rémi Denis-Courmont <rdenis (at) simphalempin (dot) com> +# +# chkconfig: 345 17 83 +# description: Starts and stops the miredo-server daemon \ +# used to provide a Teredo server. +# +### BEGIN INIT INFO +# Provides: +# Required-Start: $local_fs $remote_fs $network $syslog $time +# Required-Stop: $local_fs $remote_fs $syslog +# Short-Description: Teredo server +# Description: miredo-server daemon to provide a Teredo server +# Default-Start: 3 4 5 +# Default-Stop: 0 1 2 6 +### END INIT INFO + + +PATH=/usr/sbin:/usr/bin:/sbin:/bin +DESC="Teredo server daemon" +NAME=miredo-server +DAEMON=/usr/sbin/$NAME +DAEMON_ARGS="" +PIDFILE=/var/run/$NAME.pid +SCRIPTNAME=/etc/init.d/$NAME + +[ -x "$DAEMON" ] || exit 0 + +# Source defaults. +[ -r /etc/default/$NAME ] && . /etc/default/$NAME + +# Ensure configuration is readable. +[ -r /etc/$NAME.conf ] || exit 0 + +. /lib/lsb/init-functions + +check_start() { + if [ "x$START_MIREDO_SERVER" != "xtrue" ]; then + echo "START_MIREDO_SERVER is set to false in /etc/default/$NAME" + echo "$DAEMON not starting" + exit 0 + fi +} + +check_chroot_dir() { + if [ -d "/var/run/$NAME" ]; then + mkdir -p "/var/run/$NAME" + chmod 0755 "/var/run/$NAME" + fi +} + + +case "$1" in + start) + check_start + check_chroot_dir + log_daemon_msg "Starting $DESC" "$NAME" + start-stop-daemon --start --quiet --pidfile "$PIDFILE" \ + --exec "$DAEMON" --oknodo -- $DAEMON_ARGS + log_end_msg $? + ;; + stop) + log_daemon_msg "Stopping $DESC" "$NAME" + start-stop-daemon --stop --quiet --pidfile "$PIDFILE" \ + --retry 1 --oknodo + log_end_msg $? + ;; + reload|force-reload) + log_daemon_msg "Reloading $DESC" "$NAME" + start-stop-daemon --stop --signal 1 --quiet --pidfile "$PIDFILE" \ + --exec "$DAEMON" + log_end_msg $? + ;; + restart) + check_start # avoid stopping if would not restart + $0 stop + sleep 1 + $0 start + ;; + *) + echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 + exit 1 + ;; +esac + +exit $? diff --git a/generic/etc/miredo/client-hook b/generic/etc/miredo/client-hook new file mode 100644 index 0000000..87ae405 --- /dev/null +++ b/generic/etc/miredo/client-hook @@ -0,0 +1,70 @@ +#! /bin/sh +# +# Miredo client hook script for Linux/iproute2 +# Copyright © 2007 Rémi Denis-Courmont. +# Distributed under the terms of the GNU General Public License version 2. + +# Linux iproute2 path: +IP="/sbin/ip" + +# Linux default route default metric is 1024 +# (we put 1029 so that Teredo is used as a last resort): +METRIC=1029 + +# Linux routing table ID +# (possible values: 1-252 from /etc/iproute/rt_tables): +TABLE="teredo" + +# Linux routing rule priority +# (possible values: 1-32765, lowest number is highest priority): +PRIO=32765 + +# MTU for the tunnel interface +# (default: specified by the Teredo server, or 1280) +#MTU=1400 + +if ! test -x "$IP"; then + echo "$0: iproute2 is required! Please install it." >&2 + exit 1 +fi + +# Nothing to do with destroy event +if test "$STATE" = "destroy"; then exit 0; fi + +# If the source routing table is not configured, ignore it. +if ! "$IP" route show table "$TABLE" >/dev/null 2>&1; then + unset TABLE +else + if test "$OLD_ADDRESS"; then + "$IP" -6 rule del from "$OLD_ADDRESS" \ + prio "$PRIO" table "$TABLE" 2>/dev/null + fi + "$IP" -6 route flush table "$TABLE" 2>/dev/null +fi + +"$IP" -6 route flush dev "$IFACE" 2>/dev/null +"$IP" -6 address flush dev "$IFACE" 2>/dev/null + +"$IP" -6 link set dev "$IFACE" "$STATE" +if test "$MTU"; then + "$IP" link set dev "$IFACE" mtu "$MTU" +fi + +case "$STATE" in + up) + "$IP" -6 address add "${LLADDRESS}/64" dev "$IFACE" + "$IP" -6 address add "${ADDRESS}/32" dev "$IFACE" + "$IP" -6 route add default dev "$IFACE" metric "$METRIC" + + if test "$TABLE"; then + "$IP" -6 route add default dev "$IFACE" table "$TABLE" + "$IP" -6 rule add from "$ADDRESS" \ + prio "$PRIO" table "$TABLE" + fi +esac + +# This should be required when changing policy routing rules, but it +# seems to confuse certain kernels into removing our default route! +#"$IP" -6 route flush cache 2>/dev/null + +exit 0 diff --git a/generic/etc/miredo/miredo-server.conf b/generic/etc/miredo/miredo-server.conf new file mode 100644 index 0000000..b2e2613 --- /dev/null +++ b/generic/etc/miredo/miredo-server.conf @@ -0,0 +1,22 @@ +#! /usr/sbin/miredo-server -f -c +# +# Sample configuration file for miredo-server + +# Please refer to the miredo-server.conf(5) manpage for details. + +# Server primary IPv4 address. +# Two public IPv4 addresses are needed to operate a Teredo server. +# Miredo will open UDP port 3544 on both addresses. +ServerBindAddress 192.0.2.221 + +# Server secondary IPv4 address. +# The Microsoft Windows Teredo client implementation assumes that the +# secondary address is the primary address plus one. This is the +# default unless uncommented. +#ServerBindAddress2 192.0.2.222 + +#SyslogFacility user + +# Think twice before modifying the settings above. +#Prefix 2001:0:: +#InterfaceMTU 1280 diff --git a/generic/etc/miredo/miredo.conf b/generic/etc/miredo/miredo.conf new file mode 100644 index 0000000..732de88 --- /dev/null +++ b/generic/etc/miredo/miredo.conf @@ -0,0 +1,35 @@ +#! /usr/sbin/miredo -f -c +# +# Sample configuration file for Miredo + +# Please refer to the miredo.conf(5) man page for details. + +# Miredo can safely run as a Teredo client, which is the default. +#RelayType client + +# Name of the network tunneling interface. +InterfaceName teredo + +# Depending on the local firewall/NAT rules, you might need to force +# Miredo to use a fixed UDP port and or IPv4 address. +#BindPort 3545 +#BindAddress 192.0.2.100 + +#SyslogFacility user + +## CLIENT-SPECIFIC OPTIONS +# The hostname or primary IPv4 address of the Teredo server. +# This setting is required if Miredo runs as a Teredo client. +#**************************************************************************# +# teredo.remlab.net is an experimental service for testing only. # +# Please use another server for production and/or large scale deployments. # +#**************************************************************************# +#ServerAddress teredo.ipv6.microsoft.com +#ServerAddress teredo.ginzado.ne.jp +#ServerAddress teredo.iks-jena.de +ServerAddress teredo.remlab.net +#ServerAddress2 teredo2.remlab.net + +## RELAY-SPECIFIC OPTIONS +#Prefix 2001:0:: +#InterfaceMTU 1280 diff --git a/patches/miredo-1.2.2/autogen.sh b/patches/miredo-1.2.2/autogen.sh new file mode 120000 index 0000000..9f8a4cb --- /dev/null +++ b/patches/miredo-1.2.2/autogen.sh @@ -0,0 +1 @@ +../autogen.sh \ No newline at end of file diff --git a/patches/miredo-1.2.2/dummy.patch b/patches/miredo-1.2.2/dummy.patch new file mode 100644 index 0000000..e69de29 diff --git a/patches/miredo-1.2.2/series b/patches/miredo-1.2.2/series new file mode 100644 index 0000000..5f57aaf --- /dev/null +++ b/patches/miredo-1.2.2/series @@ -0,0 +1,3 @@ +# Required dummy patch to get autogen.sh executed without error +dummy.patch + diff --git a/rules/miredo.in b/rules/miredo.in new file mode 100644 index 0000000..4fa8b6d --- /dev/null +++ b/rules/miredo.in @@ -0,0 +1,19 @@ +## SECTION=networking + +menuconfig MIREDO + tristate + prompt "miredo " + help + Miredo is an open-source implementation of the Teredo: Tunneling IPv6 over UDP + through NATs Internet proposed standard (RFC 4380), targetting the Linux kernel + and BSD operating systems. The purpose of Teredo IPv6 tunneling is to provide + IPv6 connectivity to users behind NAT devices, such as most broadband routers, + most of which do not support IPv6. + +if MIREDO + +config MIREDO_INSTALL_SERVER + bool + prompt "Install miredo-server.conf and init.d script" + +endif diff --git a/rules/miredo.make b/rules/miredo.make new file mode 100644 index 0000000..72589be --- /dev/null +++ b/rules/miredo.make @@ -0,0 +1,96 @@ +# -*-makefile-*- +# +# Copyright (C) 2008 by Carsten Schlote <[email protected]> +# +# See CREDITS for details about who has contributed to this project. +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +PACKAGES-$(PTXCONF_MIREDO) += miredo + +# +# Paths and names +# +MIREDO_VERSION := 1.2.2 +MIREDO := miredo-$(MIREDO_VERSION) +MIREDO_SUFFIX := tar.bz2 +MIREDO_URL := http://www.remlab.net/files/miredo/$(MIREDO).$(MIREDO_SUFFIX) +MIREDO_SOURCE := $(SRCDIR)/$(MIREDO).$(MIREDO_SUFFIX) +MIREDO_DIR := $(BUILDDIR)/$(MIREDO) + +# ---------------------------------------------------------------------------- +# Get +# ---------------------------------------------------------------------------- + +$(MIREDO_SOURCE): + @$(call targetinfo) + @$(call get, MIREDO) + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +MIREDO_PATH := PATH=$(CROSS_PATH) +MIREDO_ENV := $(CROSS_ENV) + +# +# autoconf +# +MIREDO_AUTOCONF := $(CROSS_AUTOCONF_USR) \ + --localstatedir=/var \ + --without-Judy + +# ---------------------------------------------------------------------------- +# Target-Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/miredo.targetinstall: + @$(call targetinfo) + + @$(call install_init, miredo) + @$(call install_fixup, miredo,PACKAGE,miredo) + @$(call install_fixup, miredo,PRIORITY,optional) + @$(call install_fixup, miredo,VERSION,$(MIREDO_VERSION)) + @$(call install_fixup, miredo,SECTION,base) + @$(call install_fixup, miredo,AUTHOR,"Carsten Schlote <[email protected]>") + @$(call install_fixup, miredo,DEPENDS,) + @$(call install_fixup, miredo,DESCRIPTION,missing) + +# # -- Library section + + @$(call install_copy, miredo, 0, 0, 0644, -, /usr/lib/libteredo.so.5.0.0) + @$(call install_link, miredo, libteredo.so.5.0.0, /usr/lib/libteredo.so.5) + + @$(call install_copy, miredo, 0, 0, 0644, -, /usr/lib/libtun6.so.0.1.1) + @$(call install_link, miredo, libtun6.so.0.1.1, /usr/lib/libtun6.so.0.1) + @$(call install_link, miredo, libtun6.so.0.1.1, /usr/lib/libtun6.so.0) + + @$(call install_copy, miredo, 0, 0, 0755, -, /usr/lib/miredo/miredo-privproc) + +# # -- Executables + + @$(call install_copy, miredo, 0, 0, 0755, -, /usr/bin/teredo-mire) + + @$(call install_copy, miredo, 0, 0, 0755, -, /usr/sbin/miredo) + @$(call install_copy, miredo, 0, 0, 0755, -, /usr/sbin/miredo-checkconf) + +# # -- Configs + + @$(call install_copy, miredo, 0, 0, 0755, -, /etc/miredo/client-hook) + @$(call install_alternative, miredo, 0, 0, 0644, /etc/miredo/miredo.conf) + + ifdef PTXCONF_MIREDO_INSTALL_SERVER + @$(call install_alternative, miredo, 0, 0, 0644, /etc/miredo/miredo-server.conf) + @$(call install_alternative, miredo, 0, 0, 0644, /etc/init.d/miredo-server, n) + @$(call install_copy, miredo, 0, 0, 0755, -, /usr/sbin/miredo-server) + endif + @$(call install_finish, miredo) + @$(call touch) + + +# vim: syntax=make -- 1.6.6.1
-- ptxdist mailing list [email protected]
