----- Forwarded message from [email protected] ----- Date: Thu, 22 Mar 2018 15:12:24 +0100 From: [email protected] To: [email protected] Subject: Auto-discard notification Message-ID: <[email protected]>
The attached message has been automatically discarded. Date: Thu, 22 Mar 2018 14:12:21 +0000 From: [email protected] To: [email protected] Subject: DistroKit not working for BeagleCore Message-ID: <[email protected]> X-Mailer: Lotus Notes Release 8.5.1FP1 January 05, 2010 Hi *, I wanted to feel the power of ptxdist and tried to build an image for beaglecore (which is a beaglebone black) with DistroKit-2018.03.0 and OSELAS.Toolchain-2016.06.1/arm-v7a-linux-gnueabihf Toolchain. Unfortunately nothing is really working. The Boot Process is stopping here: barebox 2018.01.0-20180128-1 #1 Thu Mar 22 13:13:28 UTC 2018 Board: TI AM335x BeagleBone black detected 'BeagleBone Black' cpsw 4a100000.ethernet: detected phy mask 0x1 mdio_bus: miibus0: probed eth0: got preset MAC address: b0:d5:cc:cb:83:00 cpsw 4a100000.ethernet: Failed to setup slave 1: I/O error am335x-phy-driver 47401300.usb-phy: am_usbphy 8ffa9528 enabled musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory am335x-phy-driver 47401b00.usb-phy: am_usbphy 8ffaaa88 enabled musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory i2c-omap 44e0b000.i2c: bus 0 rev0.11 at 400 kHz omap-hsmmc 48060000.mmc: registered as 48060000.mmc mmc0: detected SD card version 2.0 mmc0: registered mmc0 omap-hsmmc 481d8000.mmc: registered as 481d8000.mmc mmc1: detected MMC card version 4.5 mmc1: registered mmc1 netconsole: registered as netconsole-1 malloc space: 0x8fefeee0 -> 0x9fdfddbf (size 255 MiB) environment load /mnt/mmc0.0/barebox.env: No such file or directory Maybe you have to create the partition. running /env/bin/init... [?25hchanging USB current limit to 1300 mA... done Hit m for menu or any other key to stop autoboot: 3 2 1 0 bootchooser: Target list $global.bootchooser.targets is empty Nothing bootable found on 'bootchooser' booting 'net' ip_route_get: No such file or directory could not open /mnt/tftp/none-linux-generic: No route to host Booting 'net' failed: No route to host booting 'net' failed: No route to host boot: No route to host type exit to get to the menu [1;32mbarebox@[1;36mTI AM335x BeagleBone black: When trying to boot manually with (global.bootm.image=/mnt/mmc0.1/boot/zImage, global.bootm.oftree=/mnt/mmc0.1/boot/am335x-boneblack.dtb): Loading ARM Linux zImage '/mnt/mmc0.1/boot/zImage' Loading devicetree from '/mnt/mmc0.1/boot/am335x-boneblack.dtb' commandline: console=ttyO0,115200 console=ttyO0,115200n8 root=/dev/nfs nfsroot =/home/none/nfsroot/generic,v3,tcp loglevel=5 systemd.log_level=warning systemd.show_status=auto [ 0.003601] timer_probe: no matching timers found [ 0.245969] omap_hwmod: debugss: _wait_target_disable failed [ 0.533505] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.836376] omap_voltage_late_init: Voltage driver support not added [ 0.871536] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.915997] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz [ 0.924074] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 0.935105] Root-NFS: no NFS server address [ 0.940012] VFS: Unable to mount root fs via NFS, trying floppy. [ 0.949346] VFS: Cannot open root device "nfs" or unknown-block(2,0): error -6 [ 0.956876] Please append a correct "root=" boot option; here are the available partitions: [ 0.965846] b300 15558144 mmcblk0 [ 0.965855] driver: mmcblk [ 0.973123] b301 32768 mmcblk0p1 abe26147-01 [ 0.973130] [ 0.980386] b302 524288 mmcblk0p2 abe26147-02 [ 0.980392] [ 0.987474] b303 524288 mmcblk0p3 abe26147-03 [ 0.987479] [ 0.994764] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) Does anybody know how to get this DEMO Case working? Regards Benedikt ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ _______________________________________________________________________ REHAU AG + Co, Kommanditgesellschaft; Persoenlich haftende Gesellschafterin: Helmut Wagner AG 3074 Muri b. Bern, Schweiz; Praesident des Verwaltungsrats: Helmut Wagner, HR Bern CHE-107.882.879; Sitz der Gesellschaft: Rehau; Registergericht: Hof, HRA 2232 ----- End forwarded message ----- -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list [email protected]
