On Fri, Jun 14, 2019 at 11:15:28AM +0200, Michael Grzeschik wrote:
> On Fri, Jun 14, 2019 at 09:18:23AM +0200, Michael Olbrich wrote:
> > On Fri, Jun 07, 2019 at 12:19:49AM +0200, Michael Grzeschik wrote:
> > > Signed-off-by: Michael Grzeschik <[email protected]>
> > > ---
> > >  patches/openocd-af952850/autogen.sh |  3 +
> > >  rules/host-openocd.in               | 12 ++++
> > >  rules/host-openocd.make             | 89 +++++++++++++++++++++++++++++
> > >  3 files changed, 104 insertions(+)
> > >  create mode 100755 patches/openocd-af952850/autogen.sh
> > >  create mode 100644 rules/host-openocd.in
> > >  create mode 100644 rules/host-openocd.make
> > > 
> > > diff --git a/patches/openocd-af952850/autogen.sh 
> > > b/patches/openocd-af952850/autogen.sh
> > > new file mode 100755
> > > index 000000000..7d344d32f
> > > --- /dev/null
> > > +++ b/patches/openocd-af952850/autogen.sh
> > > @@ -0,0 +1,3 @@
> > > +#!/bin/bash
> > > +
> > > +exec ./bootstrap
> > > diff --git a/rules/host-openocd.in b/rules/host-openocd.in
> > > new file mode 100644
> > > index 000000000..8c863598e
> > > --- /dev/null
> > > +++ b/rules/host-openocd.in
> > > @@ -0,0 +1,12 @@
> > > +## SECTION=hosttools
> > > +
> > > +menuconfig HOST_OPENOCD
> > > + tristate
> > > + prompt "openocd"
> > > + select HOST_LIBUSB
> > > + select HOST_JIMTCL
> > > + select HOST_LIBFTDI1
> > > + help
> > > +   The "Open On-Chip Debugger" provides JTAG/SWD access from GDB
> > > +   (or directly with TCL scripts) to processors with ARM and MIPS
> > > +   based cores.
> > > diff --git a/rules/host-openocd.make b/rules/host-openocd.make
> > > new file mode 100644
> > > index 000000000..8a741856e
> > > --- /dev/null
> > > +++ b/rules/host-openocd.make
> > > @@ -0,0 +1,89 @@
> > > +# -*-makefile-*-
> > > +#
> > > +# Copyright (C) 2013 by Michael Grzeschik <[email protected]>
> > > +#
> > > +# See CREDITS for details about who has contributed to this project.
> > > +#
> > > +# For further information about the PTXdist project and license 
> > > conditions
> > > +# see the README file.
> > > +#
> > > +
> > > +#
> > > +# We provide this package
> > > +#
> > > +HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
> > > +
> > > +#
> > > +# Paths and names
> > > +#
> > > +HOST_OPENOCD_VERSION     := af952850
> > > +HOST_OPENOCD_MD5 := fa6841d4e4e76d1626406a99d5b1851d
> > > +HOST_OPENOCD             := openocd-$(HOST_OPENOCD_VERSION)
> > > +HOST_OPENOCD_SUFFIX      := tar.bz2
> > > +HOST_OPENOCD_URL := 
> > > git://git.code.sf.net/p/openocd/code;tag=$(HOST_OPENOCD_VERSION)
> > > +HOST_OPENOCD_SOURCE      := 
> > > $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
> > > +HOST_OPENOCD_DIR := $(HOST_BUILDDIR)/$(HOST_OPENOCD)
> > > +
> > > +# 
> > > ----------------------------------------------------------------------------
> > > +# Prepare
> > > +# 
> > > ----------------------------------------------------------------------------
> > > +
> > > +#
> > > +# autoconf
> > > +#
> > > +HOST_OPENOCD_CONF_TOOL   := autoconf
> > > +HOST_OPENOCD_CONF_ENV    := \
> > > +         CCACHE=none \
> > 
> > Indent with on tab.
> 
> Right, will fix.
> > 
> > > +         LDFLAGS="-L$(PTXDIST_SYSROOT_HOST)/usr/lib" \
> > > +         CFLAGS="-I$(PTXDIST_SYSROOT_HOST)/usr/include"
> > 
> > The flags should be added via HOST_OPENOCD_LDFLAGS / HOST_OPENOCD_CPPFLAGS.
> > However, why do you need sysroot-host/usr/...? These directories should be
> > empty.
> 
> Why should they be empty? Aren't there all host packages installed? This
> is needed because otherwise openocd won't find libjim and headers to
> compile and link against. I did not see any other way, then setting
> these variables.

It should be (PTXDIST_SYSROOT_HOST)/lib (without /usr). I think host-jimtcl
needs to be fixed. I'm not sure why the prefix is /usr there. I'll run a
build-test to see if it works without /.

Michael

> > 
> > > +HOST_OPENOCD_CONF_OPT    := \
> > > +         $(HOST_AUTOCONF) \
> > 
> > One tab.
> 
> will fix
> 
> > Michael
> > 
> > > +         --enable-shared \
> > > +         --disable-static \
> > > +         --disable-werror \
> > > +         --disable-internal-jimtcl \
> > > +         --disable-internal-libjaylink \
> > > +         --enable-dummy \
> > > +         --enable-ftdi \
> > > +         --enable-stlink \
> > > +         --disable-ti-icdi \
> > > +         --disable-ulink \
> > > +         --disable-usb-blaster-2 \
> > > +         --disable-ft232r \
> > > +         --disable-vsllink \
> > > +         --disable-xds110 \
> > > +         --disable-osbdm \
> > > +         --disable-opendous \
> > > +         --disable-aice \
> > > +         --disable-usbprog \
> > > +         --disable-rlink \
> > > +         --disable-armjtagew \
> > > +         --disable-cmsis-dap \
> > > +         --disable-kitprog \
> > > +         --disable-usb_blaster \
> > > +         --disable-presto\
> > > +         --disable-openjtag \
> > > +         --disable-jlink \
> > > +         --disable-parport \
> > > +         --disable-parport-ppdev \
> > > +         --disable-parport-giveio \
> > > +         --disable-jtag_vpi \
> > > +         --disable-amtjtagaccel \
> > > +         --disable-zy1000 \
> > > +         --disable-zy1000-master \
> > > +         --disable-ioutil \
> > > +         --disable-ep93xx \
> > > +         --disable-at91rm9200 \
> > > +         --disable-bcm2835gpio \
> > > +         --disable-imx_gpio \
> > > +         --disable-gw16012 \
> > > +         --disable-oocd_trace \
> > > +         --disable-buspirate \
> > > +         --disable-sysfsgpio \
> > > +         --disable-minidriver-dummy \
> > > +         --disable-target-64 \
> > > +         --disable-remote-bitbang \
> > > +         --disable-doxygen-pdf \
> > > +         --disable-doxygen-html
> > > +
> > > +# vim: syntax=make
> > > -- 
> > > 2.20.1
> > > 
> > > 
> > > _______________________________________________
> > > ptxdist mailing list
> > > [email protected]
> > 
> > -- 
> > Pengutronix e.K.                           |                             |
> > Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> > Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> > 
> > _______________________________________________
> > ptxdist mailing list
> > [email protected]
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



> _______________________________________________
> ptxdist mailing list
> [email protected]


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
[email protected]

Reply via email to