On Fri, Jun 14, 2019 at 11:41:34AM +0200, Michael Olbrich wrote: > On Fri, Jun 14, 2019 at 11:15:28AM +0200, Michael Grzeschik wrote: > > On Fri, Jun 14, 2019 at 09:18:23AM +0200, Michael Olbrich wrote: > > > On Fri, Jun 07, 2019 at 12:19:49AM +0200, Michael Grzeschik wrote: > > > > Signed-off-by: Michael Grzeschik <[email protected]> > > > > --- > > > > patches/openocd-af952850/autogen.sh | 3 + > > > > rules/host-openocd.in | 12 ++++ > > > > rules/host-openocd.make | 89 +++++++++++++++++++++++++++++ > > > > 3 files changed, 104 insertions(+) > > > > create mode 100755 patches/openocd-af952850/autogen.sh > > > > create mode 100644 rules/host-openocd.in > > > > create mode 100644 rules/host-openocd.make > > > > > > > > diff --git a/patches/openocd-af952850/autogen.sh > > > > b/patches/openocd-af952850/autogen.sh > > > > new file mode 100755 > > > > index 000000000..7d344d32f > > > > --- /dev/null > > > > +++ b/patches/openocd-af952850/autogen.sh > > > > @@ -0,0 +1,3 @@ > > > > +#!/bin/bash > > > > + > > > > +exec ./bootstrap > > > > diff --git a/rules/host-openocd.in b/rules/host-openocd.in > > > > new file mode 100644 > > > > index 000000000..8c863598e > > > > --- /dev/null > > > > +++ b/rules/host-openocd.in > > > > @@ -0,0 +1,12 @@ > > > > +## SECTION=hosttools > > > > + > > > > +menuconfig HOST_OPENOCD > > > > + tristate > > > > + prompt "openocd" > > > > + select HOST_LIBUSB > > > > + select HOST_JIMTCL > > > > + select HOST_LIBFTDI1 > > > > + help > > > > + The "Open On-Chip Debugger" provides JTAG/SWD access from GDB > > > > + (or directly with TCL scripts) to processors with ARM and MIPS > > > > + based cores. > > > > diff --git a/rules/host-openocd.make b/rules/host-openocd.make > > > > new file mode 100644 > > > > index 000000000..8a741856e > > > > --- /dev/null > > > > +++ b/rules/host-openocd.make > > > > @@ -0,0 +1,89 @@ > > > > +# -*-makefile-*- > > > > +# > > > > +# Copyright (C) 2013 by Michael Grzeschik <[email protected]> > > > > +# > > > > +# See CREDITS for details about who has contributed to this project. > > > > +# > > > > +# For further information about the PTXdist project and license > > > > conditions > > > > +# see the README file. > > > > +# > > > > + > > > > +# > > > > +# We provide this package > > > > +# > > > > +HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd > > > > + > > > > +# > > > > +# Paths and names > > > > +# > > > > +HOST_OPENOCD_VERSION := af952850 > > > > +HOST_OPENOCD_MD5 := fa6841d4e4e76d1626406a99d5b1851d > > > > +HOST_OPENOCD := openocd-$(HOST_OPENOCD_VERSION) > > > > +HOST_OPENOCD_SUFFIX := tar.bz2 > > > > +HOST_OPENOCD_URL := > > > > git://git.code.sf.net/p/openocd/code;tag=$(HOST_OPENOCD_VERSION) > > > > +HOST_OPENOCD_SOURCE := > > > > $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX) > > > > +HOST_OPENOCD_DIR := $(HOST_BUILDDIR)/$(HOST_OPENOCD) > > > > + > > > > +# > > > > ---------------------------------------------------------------------------- > > > > +# Prepare > > > > +# > > > > ---------------------------------------------------------------------------- > > > > + > > > > +# > > > > +# autoconf > > > > +# > > > > +HOST_OPENOCD_CONF_TOOL := autoconf > > > > +HOST_OPENOCD_CONF_ENV := \ > > > > + CCACHE=none \ > > > > > > Indent with on tab. > > > > Right, will fix. > > > > > > > + LDFLAGS="-L$(PTXDIST_SYSROOT_HOST)/usr/lib" \ > > > > + CFLAGS="-I$(PTXDIST_SYSROOT_HOST)/usr/include" > > > > > > The flags should be added via HOST_OPENOCD_LDFLAGS / > > > HOST_OPENOCD_CPPFLAGS. > > > However, why do you need sysroot-host/usr/...? These directories should be > > > empty. > > > > Why should they be empty? Aren't there all host packages installed? This > > is needed because otherwise openocd won't find libjim and headers to > > compile and link against. I did not see any other way, then setting > > these variables. > > It should be (PTXDIST_SYSROOT_HOST)/lib (without /usr). I think host-jimtcl > needs to be fixed. I'm not sure why the prefix is /usr there. I'll run a > build-test to see if it works without /.
I've done this in master. I've not seen any issues with it. So the flags can be removed now. Michael > > > > > > > +HOST_OPENOCD_CONF_OPT := \ > > > > + $(HOST_AUTOCONF) \ > > > > > > One tab. > > > > will fix > > > > > Michael > > > > > > > + --enable-shared \ > > > > + --disable-static \ > > > > + --disable-werror \ > > > > + --disable-internal-jimtcl \ > > > > + --disable-internal-libjaylink \ > > > > + --enable-dummy \ > > > > + --enable-ftdi \ > > > > + --enable-stlink \ > > > > + --disable-ti-icdi \ > > > > + --disable-ulink \ > > > > + --disable-usb-blaster-2 \ > > > > + --disable-ft232r \ > > > > + --disable-vsllink \ > > > > + --disable-xds110 \ > > > > + --disable-osbdm \ > > > > + --disable-opendous \ > > > > + --disable-aice \ > > > > + --disable-usbprog \ > > > > + --disable-rlink \ > > > > + --disable-armjtagew \ > > > > + --disable-cmsis-dap \ > > > > + --disable-kitprog \ > > > > + --disable-usb_blaster \ > > > > + --disable-presto\ > > > > + --disable-openjtag \ > > > > + --disable-jlink \ > > > > + --disable-parport \ > > > > + --disable-parport-ppdev \ > > > > + --disable-parport-giveio \ > > > > + --disable-jtag_vpi \ > > > > + --disable-amtjtagaccel \ > > > > + --disable-zy1000 \ > > > > + --disable-zy1000-master \ > > > > + --disable-ioutil \ > > > > + --disable-ep93xx \ > > > > + --disable-at91rm9200 \ > > > > + --disable-bcm2835gpio \ > > > > + --disable-imx_gpio \ > > > > + --disable-gw16012 \ > > > > + --disable-oocd_trace \ > > > > + --disable-buspirate \ > > > > + --disable-sysfsgpio \ > > > > + --disable-minidriver-dummy \ > > > > + --disable-target-64 \ > > > > + --disable-remote-bitbang \ > > > > + --disable-doxygen-pdf \ > > > > + --disable-doxygen-html > > > > + > > > > +# vim: syntax=make > > > > -- > > > > 2.20.1 > > > > > > > > > > > > _______________________________________________ > > > > ptxdist mailing list > > > > [email protected] > > > > > > -- > > > Pengutronix e.K. | | > > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > > _______________________________________________ > > > ptxdist mailing list > > > [email protected] > > > > -- > > Pengutronix e.K. | | > > Industrial Linux Solutions | http://www.pengutronix.de/ | > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > > > > _______________________________________________ > > ptxdist mailing list > > [email protected] > > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > _______________________________________________ > ptxdist mailing list > [email protected] -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list [email protected]
