On Mon, Aug 03, 2020 at 10:35:52AM +0200, Ladislav Michl wrote: > On Mon, Aug 03, 2020 at 08:36:06AM +0200, Michael Olbrich wrote: > > On Sun, Aug 02, 2020 at 07:46:09PM +0200, Ladislav Michl wrote: > > > [email protected] is supposed to call gpsdctl which is not installed > > > at all. Also fix gpsctl vs gpsdctl confusion. > > > > > > Signed-off-by: Ladislav Michl <[email protected]> > > > --- > > > projectroot/usr/lib/systemd/system/[email protected] | 4 ++-- > > > rules/gpsd.in | 9 +++++++++ > > > rules/gpsd.make | 8 +++++--- > > > 3 files changed, 16 insertions(+), 5 deletions(-) > > > > > > diff --git a/projectroot/usr/lib/systemd/system/[email protected] > > > b/projectroot/usr/lib/systemd/system/[email protected] > > > index 24d291408..6266fd8b8 100644 > > > --- a/projectroot/usr/lib/systemd/system/[email protected] > > > +++ b/projectroot/usr/lib/systemd/system/[email protected] > > > @@ -8,5 +8,5 @@ After=dev-%i.device > > > Type=oneshot > > > Environment="GPSD_SOCKET=/var/run/gpsd.sock" > > > RemainAfterExit=yes > > > -ExecStart=/usr/bin/gpsdctl add /dev/%I > > > -ExecStop=/usr/bin/gpsdctl remove /dev/%I > > > +ExecStart=/usr/sbin/gpsdctl add /dev/%I > > > +ExecStop=/usr/sbin/gpsdctl remove /dev/%I > > > diff --git a/rules/gpsd.in b/rules/gpsd.in > > > index b69570af0..b69accac3 100644 > > > --- a/rules/gpsd.in > > > +++ b/rules/gpsd.in > > > @@ -260,10 +260,19 @@ menu "install options" > > > queries with a format that is substantially easier to > > > parse than the NMEA 0183 emitted by most GPS receivers. > > > > > > + config GPSD_GPSDCTL > > > + bool > > > + prompt "gpdsctl" > > > + help > > > + gpdsctl is a tool for sending commands to an instance of > > > + gpsd over its control socket to add or remove devices from > > > + the daemon's device list. > > > + > > > config GPSD_SYSTEMD_UNIT > > > bool > > > default y > > > depends on INITMETHOD_SYSTEMD && GPSD_GPSD > > > + select GPSD_GPSDCTL > > > prompt "systemd unit files for gpsd" > > > > > > config GPSD_GPSD_ARGS > > > diff --git a/rules/gpsd.make b/rules/gpsd.make > > > index 7f7e369f3..48bb643bc 100644 > > > --- a/rules/gpsd.make > > > +++ b/rules/gpsd.make > > > @@ -43,7 +43,8 @@ GPSD_PROGS-$(PTXCONF_GPSD_GPSMON) += gpsmon > > > GPSD_PROGS-$(PTXCONF_GPSD_NTPSHMMON) += ntpshmmon > > > GPSD_PROGS-$(PTXCONF_GPSD_PPSCHECK) += ppscheck > > > > > > -GPSD_BUILD_CLIENTS := $(if $(strip $(GPSD_PROGS-y)),yes,no) > > > +GPSD_BUILD_CLIENTS := $(call ptx/ifdef, PTXCONF_GPSD_GPSDCTL, yes, \ > > > + $(if $(strip $(GPSD_PROGS-y)), yes, no)) > > > > > > # Python programs > > > GPSD_PROGS-$(PTXCONF_GPSD_GEGPS) += gegps > > > @@ -160,6 +161,9 @@ $(STATEDIR)/gpsd.targetinstall: > > > ifdef PTXCONF_GPSD_GPSD > > > @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsd) > > > endif > > > +ifdef PTXCONF_GPSD_GPSDCTL > > > + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsdctl) > > > +endif > > > ifdef PTXCONF_GPSD_SYSTEMD_UNIT > > > @$(call install_alternative, gpsd, 0, 0, 644, \ > > > /usr/lib/systemd/system/gpsd.service) > > > @@ -172,11 +176,9 @@ ifdef PTXCONF_GPSD_SYSTEMD_UNIT > > > /usr/lib/systemd/system/gpsd.socket) > > > @$(call install_link, gpsd, ../gpsd.socket, \ > > > /usr/lib/systemd/system/sockets.target.wants/gpsd.socket) > > > -ifdef PTXCONF_GPSD_GPSCTL > > > > So, I don't know a lot about gpsd. So I need some clarification here. > > > > There is a gpsd.service and the [email protected] template. What do they do? > > Does gpsd.service do anything useful without [email protected]? > > gpsd.service just starts gpsd as a daemon on a device passed as its > argument (GPSD_GPSD_ARGS). But GPS receiver could be hotplugged as well > and that's when [email protected] comes to action.
So with a static setup [email protected] and gpsdctl are not needed, right? > > If yes then we should probably install [email protected] separately and not > > add the 'select GPSD_GPSDCTL' dependency above. > > As [email protected] calls gpsdctl, which is installed once GPSD_GPSDCTL > selected, that dependency is needed. Or 'ifdef PTXCONF_GPSD_GPSDCTL' to install [email protected] only if gpsdctl is actually installed. This way we can either run a gpsd.service without gpsdctl at all or use the two together. Michael > > If no then I think the GPSD_GPSDCTL option is not needed and it can be > > gpsdctl can be installed for GPSD_GPSD. > > This option is usefull if developer wishes to talk to running gpsd using > gpsdctl at his own. -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list [email protected] To unsubscribe, send a mail with subject "unsubscribe" to [email protected]
