On Mon, Aug 03, 2020 at 11:03:19AM +0200, Michael Olbrich wrote: > On Mon, Aug 03, 2020 at 10:35:52AM +0200, Ladislav Michl wrote: > > On Mon, Aug 03, 2020 at 08:36:06AM +0200, Michael Olbrich wrote: > > > On Sun, Aug 02, 2020 at 07:46:09PM +0200, Ladislav Michl wrote: > > > > [email protected] is supposed to call gpsdctl which is not installed > > > > at all. Also fix gpsctl vs gpsdctl confusion. > > > > > > > > Signed-off-by: Ladislav Michl <[email protected]> > > > > --- > > > > projectroot/usr/lib/systemd/system/[email protected] | 4 ++-- > > > > rules/gpsd.in | 9 +++++++++ > > > > rules/gpsd.make | 8 +++++--- > > > > 3 files changed, 16 insertions(+), 5 deletions(-) > > > > > > > > diff --git a/projectroot/usr/lib/systemd/system/[email protected] > > > > b/projectroot/usr/lib/systemd/system/[email protected] > > > > index 24d291408..6266fd8b8 100644 > > > > --- a/projectroot/usr/lib/systemd/system/[email protected] > > > > +++ b/projectroot/usr/lib/systemd/system/[email protected] > > > > @@ -8,5 +8,5 @@ After=dev-%i.device > > > > Type=oneshot > > > > Environment="GPSD_SOCKET=/var/run/gpsd.sock" > > > > RemainAfterExit=yes > > > > -ExecStart=/usr/bin/gpsdctl add /dev/%I > > > > -ExecStop=/usr/bin/gpsdctl remove /dev/%I > > > > +ExecStart=/usr/sbin/gpsdctl add /dev/%I > > > > +ExecStop=/usr/sbin/gpsdctl remove /dev/%I > > > > diff --git a/rules/gpsd.in b/rules/gpsd.in > > > > index b69570af0..b69accac3 100644 > > > > --- a/rules/gpsd.in > > > > +++ b/rules/gpsd.in > > > > @@ -260,10 +260,19 @@ menu "install options" > > > > queries with a format that is substantially easier to > > > > parse than the NMEA 0183 emitted by most GPS > > > > receivers. > > > > > > > > + config GPSD_GPSDCTL > > > > + bool > > > > + prompt "gpdsctl" > > > > + help > > > > + gpdsctl is a tool for sending commands to an instance > > > > of > > > > + gpsd over its control socket to add or remove devices > > > > from > > > > + the daemon's device list. > > > > + > > > > config GPSD_SYSTEMD_UNIT > > > > bool > > > > default y > > > > depends on INITMETHOD_SYSTEMD && GPSD_GPSD > > > > + select GPSD_GPSDCTL > > > > prompt "systemd unit files for gpsd" > > > > > > > > config GPSD_GPSD_ARGS > > > > diff --git a/rules/gpsd.make b/rules/gpsd.make > > > > index 7f7e369f3..48bb643bc 100644 > > > > --- a/rules/gpsd.make > > > > +++ b/rules/gpsd.make > > > > @@ -43,7 +43,8 @@ GPSD_PROGS-$(PTXCONF_GPSD_GPSMON) += gpsmon > > > > GPSD_PROGS-$(PTXCONF_GPSD_NTPSHMMON) += ntpshmmon > > > > GPSD_PROGS-$(PTXCONF_GPSD_PPSCHECK) += ppscheck > > > > > > > > -GPSD_BUILD_CLIENTS := $(if $(strip $(GPSD_PROGS-y)),yes,no) > > > > +GPSD_BUILD_CLIENTS := $(call ptx/ifdef, PTXCONF_GPSD_GPSDCTL, yes, \ > > > > + $(if $(strip $(GPSD_PROGS-y)), yes, no)) > > > > > > > > # Python programs > > > > GPSD_PROGS-$(PTXCONF_GPSD_GEGPS) += gegps > > > > @@ -160,6 +161,9 @@ $(STATEDIR)/gpsd.targetinstall: > > > > ifdef PTXCONF_GPSD_GPSD > > > > @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsd) > > > > endif > > > > +ifdef PTXCONF_GPSD_GPSDCTL > > > > + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsdctl) > > > > +endif > > > > ifdef PTXCONF_GPSD_SYSTEMD_UNIT > > > > @$(call install_alternative, gpsd, 0, 0, 644, \ > > > > /usr/lib/systemd/system/gpsd.service) > > > > @@ -172,11 +176,9 @@ ifdef PTXCONF_GPSD_SYSTEMD_UNIT > > > > /usr/lib/systemd/system/gpsd.socket) > > > > @$(call install_link, gpsd, ../gpsd.socket, \ > > > > > > > > /usr/lib/systemd/system/sockets.target.wants/gpsd.socket) > > > > -ifdef PTXCONF_GPSD_GPSCTL > > > > > > So, I don't know a lot about gpsd. So I need some clarification here. > > > > > > There is a gpsd.service and the [email protected] template. What do they > > > do? > > > Does gpsd.service do anything useful without [email protected]? > > > > gpsd.service just starts gpsd as a daemon on a device passed as its > > argument (GPSD_GPSD_ARGS). But GPS receiver could be hotplugged as well > > and that's when [email protected] comes to action. > > So with a static setup [email protected] and gpsdctl are not needed, right?
Yes. > > > If yes then we should probably install [email protected] separately and not > > > add the 'select GPSD_GPSDCTL' dependency above. > > > > As [email protected] calls gpsdctl, which is installed once GPSD_GPSDCTL > > selected, that dependency is needed. > > Or 'ifdef PTXCONF_GPSD_GPSDCTL' to install [email protected] only if gpsdctl > is actually installed. > > This way we can either run a gpsd.service without gpsdctl at all or use the > two together. Something like this? --- >8 --- From: Ladislav Michl <[email protected]> Subject: [PATCH v2] gpsd: fix [email protected] [email protected] is supposed to call gpsdctl which is not installed at all. Also fix gpsctl vs gpsdctl confusion. Signed-off-by: Ladislav Michl <[email protected]> --- projectroot/usr/lib/systemd/system/[email protected] | 4 ++-- rules/gpsd.in | 8 ++++++++ rules/gpsd.make | 8 ++++++-- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/projectroot/usr/lib/systemd/system/[email protected] b/projectroot/usr/lib/systemd/system/[email protected] index 24d291408..6266fd8b8 100644 --- a/projectroot/usr/lib/systemd/system/[email protected] +++ b/projectroot/usr/lib/systemd/system/[email protected] @@ -8,5 +8,5 @@ After=dev-%i.device Type=oneshot Environment="GPSD_SOCKET=/var/run/gpsd.sock" RemainAfterExit=yes -ExecStart=/usr/bin/gpsdctl add /dev/%I -ExecStop=/usr/bin/gpsdctl remove /dev/%I +ExecStart=/usr/sbin/gpsdctl add /dev/%I +ExecStop=/usr/sbin/gpsdctl remove /dev/%I diff --git a/rules/gpsd.in b/rules/gpsd.in index b69570af0..eb85305dc 100644 --- a/rules/gpsd.in +++ b/rules/gpsd.in @@ -260,6 +260,14 @@ menu "install options" queries with a format that is substantially easier to parse than the NMEA 0183 emitted by most GPS receivers. + config GPSD_GPSDCTL + bool + prompt "gpdsctl" + help + gpdsctl is a tool for sending commands to an instance of + gpsd over its control socket to add or remove devices from + the daemon's device list. + config GPSD_SYSTEMD_UNIT bool default y diff --git a/rules/gpsd.make b/rules/gpsd.make index 7f7e369f3..a6739e37e 100644 --- a/rules/gpsd.make +++ b/rules/gpsd.make @@ -43,7 +43,8 @@ GPSD_PROGS-$(PTXCONF_GPSD_GPSMON) += gpsmon GPSD_PROGS-$(PTXCONF_GPSD_NTPSHMMON) += ntpshmmon GPSD_PROGS-$(PTXCONF_GPSD_PPSCHECK) += ppscheck -GPSD_BUILD_CLIENTS := $(if $(strip $(GPSD_PROGS-y)),yes,no) +GPSD_BUILD_CLIENTS := $(call ptx/ifdef, PTXCONF_GPSD_GPSDCTL, yes, \ + $(if $(strip $(GPSD_PROGS-y)), yes, no)) # Python programs GPSD_PROGS-$(PTXCONF_GPSD_GEGPS) += gegps @@ -160,6 +161,9 @@ $(STATEDIR)/gpsd.targetinstall: ifdef PTXCONF_GPSD_GPSD @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsd) endif +ifdef PTXCONF_GPSD_GPSDCTL + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsdctl) +endif ifdef PTXCONF_GPSD_SYSTEMD_UNIT @$(call install_alternative, gpsd, 0, 0, 644, \ /usr/lib/systemd/system/gpsd.service) @@ -172,7 +176,7 @@ ifdef PTXCONF_GPSD_SYSTEMD_UNIT /usr/lib/systemd/system/gpsd.socket) @$(call install_link, gpsd, ../gpsd.socket, \ /usr/lib/systemd/system/sockets.target.wants/gpsd.socket) -ifdef PTXCONF_GPSD_GPSCTL +ifdef PTXCONF_GPSD_GPSDCTL @$(call install_alternative, gpsd, 0, 0, 644, \ /usr/lib/systemd/system/[email protected]) endif -- 2.28.0 _______________________________________________ ptxdist mailing list [email protected] To unsubscribe, send a mail with subject "unsubscribe" to [email protected]
