https://bugs.freedesktop.org/show_bug.cgi?id=79991
--- Comment #1 from Raymond <[email protected]> --- 13.174| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_1b.0.analog-stereo:analog-output. ( 13.181| 0.006) D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 32080 at 5713898467 was written 8 usec late ( 13.181| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: 0: 49% 1: 49% (request) != 0: 48% 1: 48% ( 13.181| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: in dB: 0: -18,61 dB 1: -18,61 dB (request) != 0: -19,00 dB 1: -19,00 dB ( 13.191| 0.010) D: [pulseaudio] protocol-native.c: Client indicator-sound-service changes volume of sink alsa_output.pci-0000_00_1b.0.analog-stereo. ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: 0: 66% 1: 66% ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: in dB: 0: -10,66 dB 1: -10,66 dB ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: 0: 67% 1: 67% ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: in dB: 0: -10,60 dB 1: -10,60 dB ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: 0: 100% 1: 100% (accurate-enough=yes) ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: in dB: 0: -0,06 dB 1: -0,06 dB ( 13.191| 0.000) D: [alsa-sink-ALC892 Analog] sink.c: Volume going up to 43537 at 5713932749 ( 13.191| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_1b.0.analog-stereo:analog-output. ( 13.197| 0.005) D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 38496 at 5713914610 was written 9 usec late can this be reproduced on other HDA codec with different dB per step or just specific to alc892 which has 1 dB per step ? Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Device: name="ALC892 Analog", type="Audio", device=0 Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=1, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x14 0x15] do all sound card need deferred volume enabled ? CONFIG_SND_HDA_PREALLOC_SIZE=64 your HDA max buffer seem to be 64 KBytes instead of 4096 Kbytes -- You are receiving this mail because: You are the QA Contact for the bug. You are the assignee for the bug.
_______________________________________________ pulseaudio-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs
