pulseaudio-discuss  

Messages by Thread

• [pulseaudio-discuss] pavucontrol : input device listed, but no signal Pieter J Voet
  • Re: [pulseaudio-discuss] pavucontrol : input device listed, but no signal Sean Greenslade
  • Re: [pulseaudio-discuss] pavucontrol : input device listed, but no signal Pieter J Voet
• [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies Chase Lambert
  • Re: [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies Georg Chini
  • Re: [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies Georg Chini
  • Re: [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies guest271314
  • Re: [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies Chase Lambert
  • Re: [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies Georg Chini
  • Re: [pulseaudio-discuss] module-remap-source, module-virtual-source, and latencies Chase Lambert
• [pulseaudio-discuss] call pa_stream_drain() for multiple streams su
  • Re: [pulseaudio-discuss] call pa_stream_drain() for multiple streams Sean Greenslade
• [pulseaudio-discuss] Can pa_stream_write be executed at the other thread ? su
  • Re: [pulseaudio-discuss] Can pa_stream_write be executed at the other thread ? Sean Greenslade
• [pulseaudio-discuss] [ANNOUNCE] PulseAudio 15.99.1 Arun Raghavan
• [pulseaudio-discuss] Connect Alsa Input from hw:1, 0 to null-sink thru loopback corbeille
  • Re: [pulseaudio-discuss] Connect Alsa Input from hw:1, 0 to null-sink thru loopback Sean Greenslade
  • Re: [pulseaudio-discuss] Connect Alsa Input from hw:1, 0 to null-sink thru loopback corbeille
• [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. corbeille
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. corbeille
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. Georg Chini
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. corbeille
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. Georg Chini
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. corbeille
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. Georg Chini
  • Re: [pulseaudio-discuss] Dropped xxx samples. This is most likely because downstream can't keep up and is consuming samples too slowly. corbeille
• [pulseaudio-discuss] no sound on USB-C dock audio jack mailinglis...@posteo.de
  • Re: [pulseaudio-discuss] no sound on USB-C dock audio jack SOLVED mailinglis...@posteo.de
• [pulseaudio-discuss] Need help resolving audio recording/playback issues Rich Shepard
  • Re: [pulseaudio-discuss] Need help resolving audio recording/playback issues Sean Greenslade
  • Re: [pulseaudio-discuss] Need help resolving audio recording/playback issues Rich Shepard
  • Re: [pulseaudio-discuss] Need help resolving audio recording/playback issues Rich Shepard
  • Re: [pulseaudio-discuss] Need help resolving audio recording/playback issues Sean Greenslade
• [pulseaudio-discuss] Error running from procmail Adrian van Bloois
  • Re: [pulseaudio-discuss] Error running from procmail Sean Greenslade
  • Re: [pulseaudio-discuss] Error running from procmail Adrian van Bloois
  • Re: [pulseaudio-discuss] Error running from procmail Sean Greenslade
  • Re: [pulseaudio-discuss] Error running from procmail Adrian van Bloois
  • Re: [pulseaudio-discuss] Error running from procmail Sean Greenslade
  • Re: [pulseaudio-discuss] Error running from procmail Adrian van Bloois
  • Re: [pulseaudio-discuss] Error running from procmail Sean Greenslade
  • Re: [pulseaudio-discuss] Error running from procmail Adrian van Bloois
  • Re: [pulseaudio-discuss] Error running from procmail Sean Greenslade
  • Re: [pulseaudio-discuss] Error running from procmail Adrian van Bloois
• [pulseaudio-discuss] Seeking advice on use of padsp Geoff Browne
  • Re: [pulseaudio-discuss] Seeking advice on use of padsp Sean Greenslade
  • Re: [pulseaudio-discuss] Seeking advice on use of padsp Sean Greenslade
  • Re: [pulseaudio-discuss] Seeking advice on use of padsp Sean Greenslade
  • Re: [pulseaudio-discuss] Seeking advice on use of padsp gbrowne
• Re: [pulseaudio-discuss] set media.role for VMware client Sean Greenslade
  • Re: [pulseaudio-discuss] set media.role for VMware client Sean Greenslade
  • Re: [pulseaudio-discuss] set media.role for VMware client Sean Greenslade
• [pulseaudio-discuss] pulseaudio module-combine-sink and network devices Dan MacDonald
  • Re: [pulseaudio-discuss] pulseaudio module-combine-sink and network devices Sean Greenslade
• [pulseaudio-discuss] [PATCH] volume: The volume is calculated by rounding. lishengyu
• [pulseaudio-discuss] ANN: automatic multichannel profile selection for PulseAudio Manuel Amador (Rudd-O)
• [pulseaudio-discuss] 转发：ITP Bug#1003102 tangmeng
• [pulseaudio-discuss] ITP Bug#1003102 tangmeng
  • Re: [pulseaudio-discuss] ITP Bug#1003102 Arun Raghavan
• [pulseaudio-discuss] Make paired (but not connected) BT device available as sink? Josef Wolf
  • Re: [pulseaudio-discuss] Make paired (but not connected) BT device available as sink? Georg Chini
  • Re: [pulseaudio-discuss] Make paired (but not connected) BT device available as sink? Josef Wolf
  • Re: [pulseaudio-discuss] Make paired (but not connected) BT device available as sink? Josef Wolf
  • Re: [pulseaudio-discuss] Make paired (but not connected) BT device available as sink? Georg Chini
  • Re: [pulseaudio-discuss] Make paired (but not connected) BT device available as sink? Josef Wolf
• [pulseaudio-discuss] Pulseaudio is designed to damage your hearing Patrick May
  • Re: [pulseaudio-discuss] Pulseaudio is designed to damage your hearing Andrew Eikum
• [pulseaudio-discuss] [ANNOUNCE] paprefs 1.2 Tanu Kaskinen
• [pulseaudio-discuss] Which device-string I should disable between hw:%f and iec958:%f? 赵成义
  • Re: [pulseaudio-discuss] Which device-string I should disable between hw:%f and iec958:%f? Tanu Kaskinen
• [pulseaudio-discuss] Line-in volume Paul A. Steckler
• [pulseaudio-discuss] pulseaudio failed to start at ubuntu 21.04 su
  • Re: [pulseaudio-discuss] pulseaudio failed to start at ubuntu 21.04 Tanu Kaskinen
• [pulseaudio-discuss] Start pulseaudio without graphical login Vikas Rawal
  • Re: [pulseaudio-discuss] Start pulseaudio without graphical login Vikas Rawal
• [pulseaudio-discuss] does pulseaudio support wired audio headsets controlling hardware buttons Mgr. Janusz Chmiel
• [pulseaudio-discuss] why do I use pacat/parec to record monitor device always at the same volume? Chengyi Zhao
  • Re: [pulseaudio-discuss] why do I use pacat/parec to record monitor device always at the same volume? guest271314
  • Re: [pulseaudio-discuss] why do I use pacat/parec to record monitor device always at the same volume? Chengyi Zhao
• [pulseaudio-discuss] How does PulseAudio adapt to multi-user usage scenarios? Chengyi Zhao
  • Re: [pulseaudio-discuss] How does PulseAudio adapt to multi-user usage scenarios? Sławomir Lach
• [pulseaudio-discuss] Where are stored sinks' settings? Pierre-Luc Daoust
  • Re: [pulseaudio-discuss] Where are stored sinks' settings? Tanu Kaskinen
• [pulseaudio-discuss] troubleshooting switch-on-connect and switch-on-port-available Krister
  • Re: [pulseaudio-discuss] troubleshooting switch-on-connect and switch-on-port-available Sean Greenslade
  • Re: [pulseaudio-discuss] troubleshooting switch-on-connect and switch-on-port-available Krister
• [pulseaudio-discuss] Never auto-select a device as the fallback Chris Keller
  • Re: [pulseaudio-discuss] Never auto-select a device as the fallback Sean Greenslade
• [pulseaudio-discuss] Recipe: recording sound card input and output Chris Keller
  • Re: [pulseaudio-discuss] Recipe: recording sound card input and output Joel
  • Re: [pulseaudio-discuss] Recipe: recording sound card input and output Chris Keller
  • Re: [pulseaudio-discuss] Recipe: recording sound card input and output Joel
• [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Joel Miller
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Tanu Kaskinen
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Joel
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Tanu Kaskinen
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Joel
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Tanu Kaskinen
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Colin Guthrie
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Tanu Kaskinen
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Manuel Amador (Rudd-O)
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Joel
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Joel
  • Re: [pulseaudio-discuss] Start condition failed - ConditionUser=!root not met Tanu Kaskinen
• [pulseaudio-discuss] Force SRC even when sample rates are the same Timur Aydin
  • Re: [pulseaudio-discuss] Force SRC even when sample rates are the same Tanu Kaskinen
  • Re: [pulseaudio-discuss] Force SRC even when sample rates are the same Manuel Amador (Rudd-O)
• [pulseaudio-discuss] Using pulseaudio (bluetooth) from a systemd service Federico Milano
  • Re: [pulseaudio-discuss] Using pulseaudio (bluetooth) from a systemd service Becker Béla
  • Re: [pulseaudio-discuss] Using pulseaudio (bluetooth) from a systemd service Federico Milano
• [pulseaudio-discuss] Understanding PulseSimple Large Memory Allocations Ryan McClue
  • Re: [pulseaudio-discuss] Understanding PulseSimple Large Memory Allocations Sean Greenslade
  • Re: [pulseaudio-discuss] Understanding PulseSimple Large Memory Allocations Ryan McClue
• [pulseaudio-discuss] Streaming audio from a game to voice chat, mixed with audio from microphone Patrick May
  • Re: [pulseaudio-discuss] Streaming audio from a game to voice chat, mixed with audio from microphone guest271314
  • Re: [pulseaudio-discuss] Streaming audio from a game to voice chat, mixed with audio from microphone Sean Greenslade
• [pulseaudio-discuss] Null sink monitor device unable to record 8 ch output Vijendar Reddy Mukunda
  • [pulseaudio-discuss] How to use module-loopback Patrick May
• [pulseaudio-discuss] analog stereo no longer an option for sound card Matt Zagrabelny
  • Re: [pulseaudio-discuss] analog stereo no longer an option for sound card Matt Zagrabelny
• Re: [pulseaudio-discuss] pulseaudio-discuss Digest, Vol 125, Issue 9 Vijendar Reddy Mukunda
• [pulseaudio-discuss] Why does Jack section uses "state.plugged = unknown" and "state.unplugged = unknown"? Chengyi Zhao
  • Re: [pulseaudio-discuss] Why does Jack section uses "state.plugged = unknown" and "state.unplugged = unknown"? Tanu Kaskinen
• [pulseaudio-discuss] how to pass correct channel map Vijendar Reddy Mukunda
  • Re: [pulseaudio-discuss] how to pass correct channel map Sean Greenslade
  • Re: [pulseaudio-discuss] how to pass correct channel map Sean Greenslade
• [pulseaudio-discuss] pulsectl with pulseaudio 15.0 Matthias Mirbeth
  • Re: [pulseaudio-discuss] pulsectl with pulseaudio 15.0 Tanu Kaskinen
• [pulseaudio-discuss] need to run `pulseaudio -k` to record from null sink Gareth Walker
  • Re: [pulseaudio-discuss] need to run `pulseaudio -k` to record from null sink Sean Greenslade
  • Re: [pulseaudio-discuss] need to run `pulseaudio -k` to record from null sink Gareth Walker
  • Re: [pulseaudio-discuss] need to run `pulseaudio -k` to record from null sink Sean Greenslade
• [pulseaudio-discuss] pulseaudio parec recording short interrupt at user switch Istvan Gabor
  • Re: [pulseaudio-discuss] pulseaudio parec recording short interrupt at user switch Sean Greenslade
  • Re: [pulseaudio-discuss] pulseaudio parec recording short interrupt at user switch Istvan Gabor
  • Re: [pulseaudio-discuss] pulseaudio parec recording short interrupt at user switch Sean Greenslade
• [pulseaudio-discuss] Pulseaudio on the ESP32 ? JF
  • Re: [pulseaudio-discuss] Pulseaudio on the ESP32 ? Denis Shulyaka
  • Re: [pulseaudio-discuss] Pulseaudio on the ESP32 ? JF
• [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple Sean Greenslade
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple guest271314
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple guest271314
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple Sean Greenslade
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple guest271314
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple Sean Greenslade
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple mindfsck
  • Re: [pulseaudio-discuss] Audible plop at beginning when using pcat-simple Sean Greenslade
• [pulseaudio-discuss] [ANNOUNCE] pavucontrol 5.0 Tanu Kaskinen
  • Re: [pulseaudio-discuss] [ANNOUNCE] pavucontrol 5.0 anantha lavanya
• [pulseaudio-discuss] Pulse Audio serious Issue- required sincere help anantha lavanya
  • Re: [pulseaudio-discuss] Pulse Audio serious Issue- required sincere help Sean Greenslade
• [pulseaudio-discuss] [ANNOUNCE] PulseAudio 15.0 Arun Raghavan
• [pulseaudio-discuss] Why does PA need to rewrite and rewind when I change the volume while playing audio? Chengyi Zhao
  • Re: [pulseaudio-discuss] Why does PA need to rewrite and rewind when I change the volume while playing audio? Arun Raghavan
  • Re: [pulseaudio-discuss] Why does PA need to rewrite and rewind when I change the volume while playing audio? Sean Greenslade
• [pulseaudio-discuss] blocking call in pulse core mainloop context results in sink not getting data Ravikiran belur
  • [pulseaudio-discuss] blocking call in pulse core mainloop context results in sink not getting data Ravikiran belur
  • Re: [pulseaudio-discuss] blocking call in pulse core mainloop context results in sink not getting data Arun Raghavan
  • Re: [pulseaudio-discuss] blocking call in pulse core mainloop context results in sink not getting data Ravikiran belur
  • Re: [pulseaudio-discuss] blocking call in pulse core mainloop context results in sink not getting data Arun Raghavan
• [pulseaudio-discuss] Show "Operation Not Authorized" when calling TryAcquire. Chengyi Zhao
• [pulseaudio-discuss] [ANNOUNCE] PulseAudio 14.99.2 Arun Raghavan
• [pulseaudio-discuss] IRC channel has moved Arun Raghavan
• Re: [pulseaudio-discuss] pulseaudio-discuss Digest, Vol 121, Issue 1 andreas . unterhuber
• [pulseaudio-discuss] execute commands on suspend/resume? Peter Meilstrup
  • Re: [pulseaudio-discuss] execute commands on suspend/resume? Sean Greenslade
  • Re: [pulseaudio-discuss] execute commands on suspend/resume? Sean Greenslade
• [pulseaudio-discuss] How to define a pulseaudio profile that ignores the “input” capabilities of a microphone Damian Nadales
  • Re: [pulseaudio-discuss] How to define a pulseaudio profile that ignores the “input” capabilities of a microphone guest271314
  • Re: [pulseaudio-discuss] How to define a pulseaudio profile that ignores the “input” capabilities of a microphone Damian Nadales
• [pulseaudio-discuss] Pipe Line-In input as/to Microphone input sdkjka22jhd
  • Re: [pulseaudio-discuss] Pipe Line-In input as/to Microphone input sdkjka22jhd
  • Re: [pulseaudio-discuss] Pipe Line-In input as/to Microphone input guest271314
• [pulseaudio-discuss] [ANNOUNCE] PulseAudio 14.99.1 Arun Raghavan
• [pulseaudio-discuss] Linux Mint 20.1: the internal mic of ALC255 card is not recognised sometimes on reboot Vikas Rawal
• [pulseaudio-discuss] two sound files at the same time - problem with crontab (pulseaudio involved) Christian
  • Re: [pulseaudio-discuss] two sound files at the same time - problem with crontab (pulseaudio involved) Sean Greenslade
• [pulseaudio-discuss] PulseAudio Support for Blender Jörg Müller
• [pulseaudio-discuss] Question about setup sink/source andreas . unterhuber
  • Re: [pulseaudio-discuss] Question about setup sink/source guest271314
• [pulseaudio-discuss] [patch] proplist: tweak documentation for `pa_proplist_get()` Lyndon Brown
• [pulseaudio-discuss] Sink mapping J Cornily
• [pulseaudio-discuss] Bluetooth headset HSP/HFP sound not working but microphone is Bram Lagerweij
  • Re: [pulseaudio-discuss] Bluetooth headset HSP/HFP sound not working but microphone is Bram Lagerweij
• [pulseaudio-discuss] Why should we set multichannel-input and multichannel-output to a fallback map Chengyi Zhao
  • Re: [pulseaudio-discuss] Why should we set multichannel-input and multichannel-output to a fallback map Tanu Kaskinen
  • Re: [pulseaudio-discuss] Why should we set multichannel-input and multichannel-output to a fallback map Chengyi Zhao
• [pulseaudio-discuss] a2dp_sink not available for headphone/headset mailinglis...@posteo.de
  • Re: [pulseaudio-discuss] a2dp_sink not available for headphone/headset mailinglis...@posteo.de
• [pulseaudio-discuss] One user gets sound, the other doesn't Alan Greenberger
• [pulseaudio-discuss] DBus interface and source priority Christian Bianchi
• [pulseaudio-discuss] Using PulseAudio's echo cancellation for a voice assistant Giovanni Campagna
  • Re: [pulseaudio-discuss] Using PulseAudio's echo cancellation for a voice assistant Arun Raghavan

• Earlier messages