Hi,
yes. I have four speaker connected, so I use
mplayer -channels 4 -ao alsa:device=hw=2.0 "AC3_test_the_Wall.vob"
But this works fine.
[romal@chessur Videos]$ pacmd list-sinks
Welcome to PulseAudio! Use "help" for usage information.
>>> 2 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 67% 1: 67%
0: -10,60 dB 1: -10,60 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "STAC92xx Analog"
alsa.id = "STAC92xx Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf6960000 irq 44"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition
Audio"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Intel IbexPeak HDMI"
alsa.components = "HDA:111d76d5,1028040b,00100104
HDA:80862804,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analoge Ausgabe (priority 9900)
analog-output-headphones: Analoge Kopfhörer (priority 9000)
active port: <analog-output>
index: 1
name:
<alsa_output.usb-TerraTec_DMX_6Fire_USB_000000000008B2B5-00-DMX6FireUSB.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: 0: 82% 1: 82%
balance 0,00
base volume: 100%
volume steps: 181
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 2
<alsa_card.usb-TerraTec_DMX_6Fire_USB_000000000008B2B5-00-DMX6FireUSB>
module: 22
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "DMX 6Fire USB Analog"
alsa.id = "6fire Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "TerraTec DMX6FireUSB"
alsa.long_card_name = "TerraTec DMX6FireUSB at 1:19"
alsa.driver_name = "snd_usb_6fire"
device.bus_path = "pci-0000:00:1a.0-usb-0:1.1.2:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/sound/card2"
udev.id =
"usb-TerraTec_DMX_6Fire_USB_000000000008B2B5-00-DMX6FireUSB"
device.bus = "usb"
device.vendor.id = "0ccd"
device.vendor.name = "TerraTec Electronic GmbH"
device.product.id = "0080"
device.product.name = "DMX 6Fire USB"
device.serial = "TerraTec_DMX_6Fire_USB_000000000008B2B5"
device.string = "hw:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "DMX 6Fire USB Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
>>> [romal@chessur Videos]$
[romal@chessur Videos]$ amixer -c 2
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 180
Mono: Playback 148 [82%] [on]
Simple mixer control 'Line/Phono',0
Capabilities: cenum
Items: 'Line' 'Phono'
Item0: 'Line'
Simple mixer control 'Analog',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 30
Front Left: Capture 15 [50%] [0.00dB]
Front Right: Capture 15 [50%] [0.00dB]
Simple mixer control 'Analog',1
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 180
Mono:
Front Left: Playback 172 [96%] [-4.00dB] [on]
Front Right: Playback 172 [96%] [-4.00dB] [on]
Simple mixer control 'Analog',2
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 180
Mono:
Front Left: Playback 171 [95%] [-4.50dB] [on]
Front Right: Playback 171 [95%] [-4.50dB] [on]
Simple mixer control 'Analog',3
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 180
Mono:
Front Left: Playback 171 [95%] [-4.50dB] [on]
Front Right: Playback 171 [95%] [-4.50dB] [on]
Simple mixer control 'Digital Thru',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Opt/Coax',0
Capabilities: cenum
Items: 'Optical' 'Coax'
Item0: 'Optical'
[romal@chessur Videos]$
[romal@chessur Videos]$ pactl info
Server String:
/home/romal/.pulse/50fe62ed8ef0b6bffd5c650f00000009-runtime/native
Library Protocol Version: 23
Server Protocol Version: 23
Is Local: yes
Client Index: 9
Tile Size: 65472
User Name: romal
Host Name: chessur.vorlon.lan
Server Name: pulseaudio
Server Version: 1.1
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink:
alsa_output.usb-TerraTec_DMX_6Fire_USB_000000000008B2B5-00-DMX6FireUSB.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 2736:260a
[romal@chessur Videos]$
cu romal
Am 18.04.2012 15:45, schrieb Roman Beslik:
Hi. Can you play 5.1 sound via ALSA, i.e. with "mplayer -channels 6 -ao
alsa:device=hw=1.0"? Also, share output of "pacmd list-sinks."
On 16.04.12 19:40, Robert M. Albrecht wrote:
Hi,
I'm trying to install the Terratec 6Fire USB audio device. It's an
external audio device with several analog in & output channels.
The alsa-driver is running and I can play analog stereo music or movies
on pulseaudio based players.
I can output digital sound (ac3 or dts) on spdif via optical with vlc
and mplayer.
But I can't output analog multichannel sound from flac files or movies.
Although alsamixer can access all 6 analog output channels, pulseaudio
does not see them.
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
